English
Language : 

V-735P Datasheet, PDF (1/3 Pages) Vishay Siliconix – Film Capacitors, High Current, Wrap-and-Fill, Metallized Polypropylene
V-735 P
Vishay Sprague
Film Capacitors, High Current, Wrap-and-Fill,
Metallized Polypropylene
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 105 °C
Capacitance Range: 1.0 µF to 30.0 µF
Capacitance Tolerance: ± 10 %, ± 5 %
DC Voltage Rating: 100 WVDC to 400 WVDC
Equivalent Series Resistance: 20 kHz to 100 kHz
Dissipation Factor: 0.1 % maximum
Measured at 1000 Hz, at + 25 °C
ΔV/ΔT: 10 V/ms maximum
Voltage Test: 200 % of rated voltage for 2 min
Insulation Resistance: Measured at 100 WVDC after a
2 min charge.
At + 25 °C: 200 000 MΩ/µF, or 400 000 MΩ minimum
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DC Life Test: 140 % of rated voltage for 1000 h at + 105 °C.
No visible damage. No open or short circuits.
Maximum Δ CAP ± 1.0 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.10 %
FEATURES
• Wire or lug terminals
• High stability
• High ripple to 30 A
• Low inductance
• Low ESR
• Compliant to RoHS directive 2002/95/EC
Humidity Test: 95 % relative humidity at + 40 °C for 250 h.
No visible damage.
Maximum Δ CAP ± 1.0 %
Minimum IR = 20 % of initial limit
Maximum DF = 0.12 %
PHYSICAL CHARACTERISTICS
Pull Test:
Wire Leads: - 5 lb (2.3 kg) for one min. No physical damage.
Terminal Lugs: - 10 lb (4.5. kg) for one min. No physical
damage.
Lead Bend: After three complete consecutive bends. No
damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
DIMENSIONS in inches [millimeters]
1.750
[44.45]
Min.
L
± 0.062 [1.57]
1.750
[44.45]
Min.
Terminal Style L
D
Max.
Tinned Solid Copper Wire (1)
Tinned Solid Copper Lug
L1
± 0.062 [1.57]
L2
± 0.062 [1.57]
D Max.< 0.700 [17.78], No. 20 AWG Wire 0.032 [0.812] Nominal Diameter
D Max. ≥ 0.700 [17.78], No. 18 AWG Wire 0.040 [1.016] Nominal Diameter
Terminal Style H
D
Max.
0.360 ± 0.005
[9.14 ± 0.13]
L
± 0.062 [1.57]
0.156 ± 0.005 Dia.
[3.96 ± 0.13]
0.312 [7.9] Min.
0.0032 ± 0.002
[0.81 ± 0.05]
L1 = L + 0.766 [19.46]
L2 = L + 0.437 [11.10]
Note (1) Leads to be within ± 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge (Terminal Style L only).
Document Number: 42093
Revision: 12-Mar-09
For technical questions, contact: spresale@vishay.com
www.vishay.com
25