V-430P Datasheet, PDF (1/4 Pages) Vishay Siliconix – Metallized Polyester Film Capacitors, Wrap-and-Fill

V-430 P
Vishay Sprague
Metallized Polyester Film Capacitors, Wrap-and-Fill
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
Capacitance Range: 0.0047 µF to 10.0 µF
Capactiance Tolerance: ± 20 %, ± 10 %, ± 5 %
DC Voltage Rating: 50 WVDC to 600 WVDC
Dissipation Factor: 1.0 % maximum
Voltage Test: 200 % of rated voltage for 2 min
Insulation Resistance:
At + 25 °C: 25 000 MΩ/µF or 50 000 MΩ minimum
At + 85 °C: 1000 MΩ/µF or 2500 MΩ minimum
Vibration Test (Condition B):
No mechanical damage, short, open or intermittent circuits.
FEATURES
• Economical
• Extensive standard ratings
• Rugged construction
• Small size
• Compliant to RoHS directive 2002/95/EC
DC Life Test: 125 % of rated voltage for 250 h at + 85 °C.
No open or short circuits. No visible damage.
Maximum Δ CAP = ± 10 %
Minimum IR = 50 % of initial limit
Maximum DF = 1.25 %
Humidity Test: 95 % relative humidity at + 40 °C for 250 h.
No visible damage.
Maximum Δ CAP ± 10 %
Minimum IR = 20 % of initial limit
Maximum DF = 2.0 %
PHYSICAL CHARACTERISTICS
Lead Pull: 5 lb (2.3 kg) for one min. No physical damage.
Lead Bend: After three complete consecutive bends, no
damage.
Marking: Sprague^® trademark, type or part number,
capacitance and voltage.
DIMENSIONS in inches (millimeters)
1.750 [44.45]
Min.
L
+ 0.062 [1.57]
- 0.031 [0.79]
1.750 [44.45]
Min.
D
Max.
Solid Tinned Wire ⁽¹⁾
Note
(1) _{Lead size: D Max. < 0.270 [6.86] 0.025 [0.64] (No. 22 AWG). D Max ≥ 0.270 [6.86] 0.032 [0.81] (No. 20 AWG).}
Leads to be within ± 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF)
PART NUMBER
± 10 % TOLERANCE ± 5 % TOLERANCE
50 WVDC
0.12
V-430P124X9050
V-430P124X5050
0.15
V-430P154X9050
V-430P154X5050
0.18
V-430P184X9050
V-430P184X5050
0.22
V-430P224X9050
V-430P224X5050
0.27
V-430P274X9050
V-430P274X5050
0.33
V-430P334X9050
V-430P334X5050
0.39
V-430P394X9050
V-430P394X5050
0.47
V-430P474X9050
V-430P474X5050
0.56
V-430P564X9050
V-430P564X5050
0.68
V-430P684X9050
V-430P684X5050
0.82
V-430P824X9050
V-430P824X5050
CASE SIZE
D
L
0.196 [4.98]
0.210 [5.33]
0.223 [5.66]
0.240 [6.10]
0.258 [6.55]
0.279 [7.09]
0.250 [6.35]
0.269 [6.83]
0.288 [7.32]
0.311 [7.90]
0.270 [6.86]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
1.000 [25.40]
Document Number: 42091
Revision: 12-Mar-09
For technical questions, contact: [e-mail]
LEAD
AWG NO.
22
22
22
22
22
20
22
22
20
20
20
www.vishay.com
25