UHF5JT-E3 Datasheet, PDF (1/4 Pages) Vishay Siliconix – High Voltage Ultrafast Rectifier

www.vishay.com
UH5JT, UHF5JT
Vishay General Semiconductor
High Voltage Ultrafast Rectifier
TO-220AC
ITO-220AC
UH5JT
2
1
PIN 1
PIN 2
CASE
UHF5JT
PIN 1
PIN 2
2
1
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
t_rr
V_F at I_F = 5.0 A
T_J max.
5A
600 V
60 A
25 ns
1.39 V
175 °C
FEATURES
• Oxide planar chip junction
• Ultrafast recovery time
• Soft recovery characteristics
• Low switching losses, high efficiency
• High forward surge capability
• Solder bath temperature 275 °C maximum,
10 s per JESD 22-B106
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high voltage continuous mode power factor
correctors (CCM PFC), switching mode power supplies,
freewheeling diodes and secondary DC/DC rectification
application.
MECHANICAL DATA
Case: TO-220AC, ITO-220AC
Molding compound meets UL 94V-0 flammability rating
Base P/N - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (Fig. 1)
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
V_RRM
I_F(AV)
I_FSM
Isolation voltage (ITO-220AC only) from terminal to heatsink
t = 1 min
V_AC
Operating junction and storage temperature range
T_J, T_STG
UH5JT
UHF5JT
600
5
60
1500
- 55 to + 175
UNIT
V
A
A
V
°C
Revision: 07-Dec-12
1
Document Number: 88999
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000