UG30A Datasheet, PDF (1/2 Pages) Vishay Siliconix – Dual Ultrafast Plastic Rectifier

UG30APT thru UG30DPT
Vishay Semiconductors
formerly General Semiconductor
Dual Ultrafast Plastic Rectifier
Reverse Voltage 50 to 200V
Forward Current 30A
0.245 (6.2)
0.225 (5.7)
0.840 (21.3)
0.820 (20.8)
TO-247AD
0.645 (16.4)
0.625 (15.9)
0.323 (8.2)
0.313 (7.9)
0.203 (5.16)
0.193 (4.90)
30
0.170
(4.3)
0.142 (3.6)
0.138 (3.5)
10 TYP.
BOTH SIDES
1
2
3
0.086 (2.18)
0.076 (1.93)
0.160 (4.1)
0.140 (3.5)
0.795 (20.2)
0.775 (19.6)
0.127 (3.22)
0.117 (2.97)
PIN 1
PIN 3
0.118 (3.0)
0.108 (2.7)
PIN 2
CASE
0.225 (5.7)
0.205 (5.2)
0.048 (1.22)
0.044 (1.12)
0.030 (0.76)
0.020 (0.51)
Dimensions in inches and (millimeters)
0.078 REF
(1.98)
10 °
1 REF.
BOTH
SIDES
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Ideally suited for use in very high frequency switching
power supplies, inverters and as a free wheeling diodes
• Ultrafast, 15 nanosecond typical recovery time
• Low leakage current • Glass passivated
• Soft recovery characteristics
• Excellent high temperature switching
Mechanical Data
Case: JEDEC TO-247AD molded plastic body over
passivated chips
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
250°C, 0.16" (4.06mm) from case for 10 seconds
Polarity: As marked
Mounting Position: Any
Weight: 2.2 oz., 6.3 g
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol UG30APT UG30BPT UG30CPT UG30DPT Unit
Maximum repetitive peak reverse voltage
VRRM
50
Maximum RMS voltage
VRMS
35
Maximum DC blocking voltage
VDC
50
Maximum average forward rectified current at TC=120°C IF(AV)
Peak forward surge current
8.3 ms single half sine-wave superimposed
IFSM
on rated load (JEDEC Method) at TC=120°C
Typical thermal resistance ⁽¹⁾
RΘJC
Operating and storage temperature range
TJ, TSTG
100
150
70
105
100
150
30
300
2.0
–65 to +150
200
V
140
V
200
V
A
A
°C/W
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Maximum instantaneous forward voltage per leg at 15A
1.0
30A
VF
1.15
V
10A TJ=100°C
0.85
Maximum DC reverse current at
rated DC blocking voltage per leg
TA =25°C
TA =100°C
IR
15
800
µA
Maximum reverse recovery time
at IF=0.5A, IR=1.0A, Irr=0.25A
trr
20
ns
Maximum reverse recovery time at IF=15A, TJ= 25°C
VR=30V, di/dt=50 A/µs, IRR=10% IRM
TJ=100°C
trr
35
50
ns
Maximum recovered stored charge
TJ=25°C
IF=15A, VR=30V, di/dt=50 A/µs, IRR=10% IRM TJ=100°C
Qrr
22
50
nC
Typical junction capacitance at 4.0V, 1MHZ
CJ
70
pF
Note: (1) Thermal resistance from junction to case per leg mounted on heatsink
Document Number 88762
03-Jul-02
www.vishay.com
1