TS3Y Datasheet, PDF (1/2 Pages) Vishay Siliconix – Surface Mount Miniature Trimmers 3mm Single-Turn Cermet Sealed

TS3Y
Vishay Sfernice
Surface Mount Miniature Trimmers 3mm
Single-Turn Cermet Sealed
FEATURES
• 0.125 Watt at 70°C
• Excellent Stability
• Small Size for Optimum Packing Density
• Suitable for both Manual and Automatic Operation
DIMENSIONS in millimeters
TS3 YJ
1.3
0.9
0.9
0.65
2.25
2.2
0.15
3.2
2
3.5
3
1
Adjustment slot
0.51wide
x 1.93 long
x 0.51 deep
RECOMMENDED
SOLDERING AREAS
1.6
1.6
0.6
1.6
4.5
0.65
1.1
1.1
CIRCUIT DIAGRAM
a
(1)
b
(2)
c
(3)
cw
SOLDERING RECOMMENDATIONS
Vapor phase: 215°C/20 to 40 seconds.
Reflow: 230°C/20 seconds.
Do not exceed peak 260°C or with an IRON 40W: 3 seconds
at 350°C.
Soldering is possible by wave, reflow, and vapour phase.
ELECTRICAL SPECIFICATIONS
Resistive Element
Electrical Travel
Resistance Range
Stocked Range
Standard Series
Tolerance Standard
Power Rating
Temp. Coefficient (Max.)
Limiting Element Voltage (Max.)
Contact Resistance Variation
End Resistance
Dielectric Strength (Rms)
Insulation Resistance
Cermet
220°
10Ω to 2MΩ
1KΩ to 100KΩ
1-2-5
± 20%
0.125W at 70°C
± 150ppm/°C
200V
3% or 3Ω
1% or 3Ω
500V
100MΩ
Document Number: 51041
Revision: 19-Jan-04
For technical questions, contact: [e-mail]
www.vishay.com
11