TR3A106K016C1700 Datasheet, PDF (1/29 Pages) Vishay Siliconix – Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT®, Molded Case, Low ESR

www.vishay.com
TR3
Vishay Sprague
Solid Tantalum Surface Mount Chip Capacitors
TANTAMOUNT^®, Molded Case, Low ESR
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.47 μF to 1000 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 4 V_DC to 63 V_DC
FEATURES
• Low ESR
• 100 % surge current tested (C, D, and E case
sizes)
Available
• Molded case available in seven case codes
• High ripple current carrying capability
Available
• Terminations: 100 % matte tin, standard tin/lead available
• Compatible with “High Volume” automatic pick and place
equipment
• Compliant terminations
• Meets IEC specification QC300801/US0001 and
EIA535BAAC mechanical and performance requirements
• Moisture sensitivity level 1
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
• Industrial
• Telecom infrastructure
• Consumer
• Computer
• General purpose
ORDERING INFORMATION
TR3
D
107
TYPE CASE CODE
CAPACITANCE
K
CAPACITANCE
TOLERANCE
010
DC VOLTAGE
RATING AT + 85 °C
C
TERMINATION AND
PACKAGING
0100
ESR
See Ratings
and Case
Codes table
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros
to follow.
K = ± 10 %
M = ± 20 %
This is expressed
in V. To complete
the three-digit
block, zeros precede
the voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
C = Matte tin/7"
(178 mm) reels
D = Matte tin/13"
(330 mm) reels
E = Tin/lead/7"
(178 mm) reels
F = Tin/lead/13"
(330 mm) reels
Maximum 100 kHz
ESR in m.
See note below.
Notes
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. 
Voltage substitutions will be marked with the higher voltage rating.
Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting.
• Dry pack is available per request, contact regional marketing.
Revision: 19-Jul-13
1
Document Number: 40080
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000