TPSMB30AHE3-5BT Datasheet, PDF (1/5 Pages) Vishay Siliconix – Surface Mount PAR® Transient Voltage Suppressors

www.vishay.com
TPSMB6.8 thru TPSMB43A
Vishay General Semiconductor
Surface Mount PAR^® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
DO-214AA (SMB)
PRIMARY CHARACTERISTICS
V_BR
6.8 V to 43 V
V_WM
5.50 V to 36.8 V
P_PPM
600 W
I_FSM
75 A
T_J max.
185 °C
Polarity
Uni-directional
Package
DO-214AA (SMB)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive and telecommunication.
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• T_J = 185 °C capability suitable for high reliability
and automotive requirement
• Available in uni-directional polarity only
• 600 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Case: DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T_A = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) ⁽¹⁾⁽²⁾
Peak pulse current with a 10/1000 μs waveform (fig. 3) ⁽¹⁾
Peak forward surge current 8.3 ms single half sine-wave ⁽²⁾⁽³⁾
Maximum instantaneous forward voltage at 50 A ⁽²⁾⁽³⁾
P_PPM
I_PPM
I_FSM
V_F
Operating junction and storage temperature range
T_J, T_STG
VALUE
600
See table next page
75
3.5
- 65 to + 185
Notes
(1) _{Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2}
(2) _{Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads at each terminal}
(3) _{Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum}
UNIT
W
A
A
V
°C
Revision: 05-Oct-12
1
Document Number: 88406
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000