TPC43A_11 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Surface Mount PAR Transient Voltage Suppressors

New Product
TPC6.8 thru TPC43A
Vishay General Semiconductor
Surface Mount PAR^® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
eSMP ^® Series
A
1
2
TO-277A (SMPC)
A
Anode
Cathode 1
Cathode 2
PRIMARY CHARACTERISTICS
V_BR
6.8 V to 43 V
P_PPM
1500 W
I_FSM
200 A
T_J max.
185 °C
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• T_J = 185 °C capability suitable for high reliability
and automotive requirement
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
• Uni-direction only
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
• Meets MSL level 1, per J-STD-020
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA
Case: TO-220AA (SMPC)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHM3 - halogen-free, RoHS compliant, and
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HM3 suffix meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (T_A = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak power dissipation with a 10/1000 μs waveform (fig. 3) ⁽¹⁾⁽²⁾
Peak power pulse current with a 10/1000 μs waveform (fig. 1) ⁽¹⁾
Peak forward surge current 8.3 ms single half sine-wave ⁽²⁾
Maximum instantaneous forward voltage at 100 A ⁽³⁾
P_PPM
I_PPM
I_FSM
V_F
1500
See next table
200
3.5
Operating junction and storage temperature range
T_J, T_STG
- 65 to + 185
Notes
(1) _{Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2}
(2) _{Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum}
(3) _{Pulse test: 300 μs pulse width, 1 % duty cycle}
UNIT
W
A
A
V
°C
Document Number: 89056 For technical questions within your region, please contact one of the following:
Revision: 10-May-11
[e-mail], [e-mail], [e-mail]
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000