TNPW12061K32DETA Datasheet, PDF (1/8 Pages) Vishay Siliconix – High Stability Thin Film Chip Resistor

TNPW
Vishay
High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C)
TNPW Precision Thin Film Flat Chip Resistors are the
perfect choice for most fields of modern electronics where
reliability and stability is of major concern. Typical
applications include telecommunication, industrial, medical
equipment, high-end computer and audio/video electronics.
FEATURES
• Metal film layer on high quality ceramic
• Protective top coat
• Tin/lead (Pb) solder contacts
• Excellent overall stability at different environmental
conditions ≤ 0.05 % (1000 h rated power at + 70 °C)
• Low temperature coefficient and tight tolerances (± 0.1 %;
± 10 ppm/K)
APPLICATIONS
• Automotive
• Telecommunication
• Medical Equipment
• Industrial Equipment
STANDARD ELECTRICAL SPECIFICATIONS
TNPW0402 TNPW0603 TNPW0805
TNPW1206 TNPW1210¹⁾ TNPW2010 TNPW2512¹⁾
Metric Size
RR 1005M
RR 1608M
RR 2012M
RR 3216M
RR 3225M
RR 5025M
RR 6332M
Resistance range 10 Ω to 100 kΩ 10 Ω to 332 kΩ 10 Ω to 1 MΩ 10 Ω to 2 MΩ 10 Ω to 3.01 MΩ 10 Ω to 4.99 MΩ 10 Ω to 8.87 MΩ
Resistance
tolerance
Temperature
Coefficent
Climatic category
(LCT/UCT/days)
Rated dissipation,
P₇₀ ²⁾
Operating voltage,
U_max AC/DC
Maximum permissible
film temperature
± 1 %; ± 0.5 %; ± 0.1 %
± 50 ppm/K; ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
55/125/56
55/125/56
55/125/56
55/125/56
55/125/56
0.063 W
0.1 W
0.125 W
0.25 W
0.33 W
50 V
75 V
150 V
200 V
200 V
155 °C
155 °C
155 °C
155 °C
155 °C
± 50 ppm/K; ± 25 ppm/K
55/125/56
55/125/56
0.4 W
0.5 W
300 V
300 V
155 °C
155 °C
Thermal resistance³⁾ 870 K/W
550 K/W
440 K/W
220 K/W
170 K/W
140 K/W
110 K/W
Insulation voltage:
U_ins 1 min
continuous
75 V
75 V
100 V
75 V
200 V
75 V
300 V
75 V
300 V
75 V
300 V
75 V
300 V
75 V
Failure rate
≤ 0.3 x 10^-9/h ≤ 0.3 x 10^-9/h ≤ 0.3 x 10^-9/h ≤ 0.3 x 10^-9/h ≤ 0.3 x 10^-9/h ≤ 0.3 x 10^-9/h ≤ 0.3 x 10^-9/h
Weight/1000 pcs.
0.65 g
2g
5.5 g
10 g
16 g
28 g
39 g
1) _{Size not specified in EN 140401-801}
2) _{Rated voltage P × R . The power dissipation on the resistor}
generates a temperature rise against the local ambient, depending
on the heat flow support of the printed-circuit board (thermal
resistance). The rated dissipation applies only if the permitted film
temperature is not exceeded
3) _{Measuring conditions in accordance with EN 140401-801}
• TNPW 0402 without marking
• Extended values, tighter tolerances and temperature coefficient
available on request
www.vishay.com
66
For technical questions contact: [e-mail]
Document Number: 31006
Revision: 06-Jul-06