TNPW-E3 Datasheet, PDF (1/13 Pages) Vishay Siliconix – High Stability Thin Film Flat Chip Resistors

www.vishay.com
TNPW e3
Vishay
High Stability Thin Film Flat Chip Resistors
FEATURES
• Superior moisture resistivity (85 °C; 85 % RH)
• Excellent overall stability at different
environmental conditions  0.05 % (1000 h
rated power at 70 °C)
• AEC-Q200 qualified (sizes 0402 to 1206)
• Single lot date code (optional)
• Sulfur resistance verified according to ASTM B 809
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TNPW e3 precision thin film flat chip resistors are the perfect
choice for most fields of modern electronics where highest
reliability and stability is of major concern. Typical
applications include test and measuring equipment, medical
equipment, industrial, and automotive.
APPLICATIONS
• Test and measuring equipment
• Medical equipment
• Industrial equipment
• Automotive
TECHNICAL SPECIFICATIONS
DESCRIPTION
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
Imperial size
0402
0603
0805
1206
Metric size code
RR1005M
RR1608M
RR2012M
RR3216M
Resistance range
10  to 100 k 4.7  to 332 k 4.7  to 1 M
4.7  to 2 M
Resistance tolerance
± 1 %; ± 0.5 %; ± 0.1 %
Temperature coefficient
± 50 ppm/K; ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
Rated dissipation, P₇₀ ⁽²⁾
Operating voltage, U_max. AC_RMS or DC
Permissible film temperature, _{F max.} ⁽²⁾
Operating temperature range
0.100 W
50 V
0.125 W
75 V
0.200 W
150 V
155 °C
-55 °C to 155 °C
0.400 W
200 V
Permissible voltage against ambient
(insulation):
1 min; U_ins
75 V
100 V
Failure rate: FIT_observed
Notes
(1) _{The detail specification EN 140401-801 does not cover this product size.}
(2) _{Please refer to APPLICATION INFORMATION, see next page.}
200 V
 0.1 x 10^-9/h
300 V
TNPW1210 e3 ⁽¹⁾
1210
RR3225M
10  to 3.01 M
0.500 W
200 V
300 V
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 12-May-16
1
Document Number: 28758
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000