TNPU0603 Datasheet, PDF (1/7 Pages) Vishay Siliconix – High Precision Thin Film Chip Resistors

TNPU e3
Vishay Draloric
High Precision Thin Film Chip Resistors
± 0.05 %; ± 5 ppm/K
TNPU e3 High Precision Thin Film Flat Chip Resistors
combine the proven reliability of TNPW e3 products with a
most advanced level of precision and stability. This unique
combination makes the product perfectly suited for all
applications with outstanding requirements towards size,
reliable precision and stability.
FEATURES
• Low temperature coefficient and tight
tolerances (± 0.05 %; ± 5 ppm/K)
• Superior moisture resistivity ≤ 0.25 % (85 °C;
56 days; 85 % RH)
• Waste gas resistant
• AEC-Q200 qualified
• Compliant to RoHS directive 2002/95/EC
• Find out more about Vishay’s Automotive Grade Product
requirements at: www.vishay.com/applications
APPLICATIONS
• Industrial equipment
• Telecommunication
• Medical equipment
• Instrumentation
• Test and measuring equipment
• Automotive
STANDARD ELECTRICAL SPECIFICATIONS
TNPU0603 e3
Metric size
RR 1608M
Resistance range
100 Ω to 100 kΩ
Resistance tolerance
Temperature coefficent
Climatic category (LCT/UCT/days)
55/125/56
Rated dissipation, P₇₀ ⁽¹⁾
Operating voltage, U_max. AC/DC
Maximum permissible film temperature
0.1 W
75 V
125 °C
Thermal resistance ⁽²⁾
Max. resistance change at P₇₀; |ΔR/R|
1000 h
550 K/W
≤ 0.05 %
8000 h
≤ 0.10 %
225 000 h
≤ 0.30 %
Insulation voltage:
U_ins 1 min
Continuous
100 V
75 V
FIT_observed
Weight/1000 pieces
≤ 0.1 x 10^-9/h
2g
TNPU0805 e3
RR 2012M
100 Ω to 332 kΩ
± 0.1 %; ± 0.05 %
± 10 ppm/K; ± 5 ppm/K
55/125/56
0.125 W
150 V
125 °C
440 K/W
≤ 0.05 %
≤ 0.10 %
≤ 0.30 %
200 V
75 V
≤ 0.1 x 10^-9/h
5.5 g
TNPU1206 e3
RR 3216M
100 Ω to 511 kΩ
55/125/56
0.25 W
200 V
125 °C
220 K/W
≤ 0.05 %
≤ 0.10 %
≤ 0.30 %
300 V
75 V
≤ 0.1 x 10^-9/h
10 g
Notes
(1) _{Rated voltage P x R . The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat}
flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not
exceeded.
(2) _{Measuring conditions in accordance with EN 140401-801.}
www.vishay.com
314
For technical questions, contact: [e-mail]
Document Number: 28779
Revision: 12-Aug-10