TM8 Datasheet, PDF (1/10 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors MICROTANTM High Reliability, Low DCL, Leadframeless Molded

TM8
Vishay Sprague
Solid Tantalum Chip Capacitors
MICROTAN^TM High Reliability, Low DCL, Leadframeless Molded
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(to + 125 °C with voltage derating)
ORDERING INFORMATION
TM8
MODEL
R
CASE
CODE
106
CAPACITANCE
M
CAPACITANCE
TOLERANCE
FEATURES
• High reliability solid surface mount tantalum
capacitors
• Low DCL for extended battery life
• Small sizes for space constrained applications
• L-shaped terminations for superior board
mounting
• Suitable for medical implantable applications with
additional screening
• Compliant to RoHS directive 2002/95/EC
Capacitance Range: 1 µF to 47 µF
Capacitance Tolerance: ± 10 % and ± 20 % standard
Voltage Range: 2 WV_DC to 40 WV_DC
016
DC VOLTAGE RATING
AT + 85 °C
E
TERMINATION/
PACKAGING
B
RELIABILITY
LEVEL
A
SURGE
CURRENT
See
Ratings
and
Case
Codes
Table
This is expressed
in picofarads.
The first two
digits are the
significant
figures. The third
is the number of
zeros to follow.
Note
• Standard options are in bold
K = ± 10 %
M = ± 20 %
This is expressed in
volts.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
E = Sn/Pb solder/
7" (178 mm) reels
R = Sn/Pb solder/
7" (178 mm)
300 pcs. qty.
C = 100 % tin/
7" (178 mm) reels
U = 100 % tin/
7" (178 mm)
300 pcs. qty.
B = 0.1 %
weibull FRL
S = Hi-Rel std.
(40 h burn-in)
Z = Non-
established
reliability
A = 10 cycles
at 25 °C
B = 10 cycles at
- 55 °C/+ 85 °C
Z = None
DIMENSIONS in inches [millimeters]
Anode Termination
Anode Polarity Bar
Cathode Termination
C
W
H
P1
P2
CASE
Q
D
E
F
K
L
0.100 ± 0.015
[2.54 ± 0.38]
0.150 ± 0.015
[3.8 ± 0.38]
0.201 ± 0.015
[5.1 ± 0.38]
0.220 ± 0.015
[5.6 ± 0.38]
0.045 ± 0.002
[1.14 ± 0.05]
www.vishay.com
38
P1
L
W
0.053 ± 0.012
[1.35 ± 0.30]
0.100 ± 0.015
[2.54 ± 0.38]
0.100 ± 0.015
[2.54 ± 0.38]
0.138 ± 0.012
[3.5 ± 0.3]
0.026 ± 0.002
[0.66 ± 0.05]
H
0.050 ± 0.012
[1.27 ± 0.30]
0.050 ± 0.012
[1.27 ± 0.30]
0.050 ± 0.012
[1.27 ± 0.30]
0.050 ± 0.012
[1.27 ± 0.30]
0.024 max.
[0.61 max.]
P1
0.031 + 0.004/- 0.006
[0.80 + 0.1/- 0.15]
0.031 + 0.004/- 0.006
[0.80 + 0.1/- 0.15]
0.031 + 0.004/- 0.006
[0.80 + 0.1/- 0.15]
0.039 ± 0.005
[1.0 ± 0.13]
0.010 ± 0.004
[0.25 ± 0.1]
P2 (REF.)
0.038 ± 0.010
[0.96 ± 0.25]
0.088 ± 0.010
[2.24 ± 0.25]
0.139 ± 0.010
[3.5 ± 0.25]
0.142 ± 0.010
[3.6 ± 0.25]
0.020 min.
[0.51 min.]
C
0.046 + 0.009/- 0.001
[1.17 + 0.23/- 0.025]
0.091 + 0.009/- 0.001
[2.3 + 0.23/- 0.025]
0.091 + 0.009/- 0.001
[2.3 + 0.23/- 0.025]
0.126 + 0.009/- 0.001
[3.2 + 0.23/- 0.025]
0.015 ± 0.004
[0.38 ± 0.1]
For technical questions, contact: [e-mail]
Document Number: 40133
Revision: 22-Jun-10