TGL41-6.8_08 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Surface Mount TRANSZORB® Transient Voltage Suppressors

TGL41-6.8 thru TGL41-200A
Vishay General Semiconductor
Surface Mount TRANSZORB^® Transient Voltage Suppressors
DO-213AB (GL41)
PRIMARY CHARACTERISTICS
V_BR
P_PPM
P_D
I_FSM
T_J max.
6.8 V to 200 V
400 W, 200 W
1.0 W
40 A
150 °C
FEATURES
• Plastic MELF package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional polarity only
• 400 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 % (200 W above 91 V)
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 250 °C
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of
sensor units for consumer, computer, industrial and
telecommunication.
MECHANICAL DATA
Case: DO-213AB (GL41)
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Blue band denotes the cathode which is
positive with respect to the anode under normal TVS
operation
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBO
VALUE
Peak pulse power dissipation with a 10/1000 µs waveform ⁽¹⁾ (Fig. 1)
Power dissipation on infinite heatsink at T_L = 75 °C
Peak pulse current with a 10/1000 µs waveform ⁽¹⁾ (Fig. 3)
Peak forward surge current, 8.3 ms single half sine-wave uni-directional only ⁽²⁾
Maximum instantaneous forward voltage at 25 A for uni-directional only
P_PPM
P_D
I_PPM
I_FSM
V_F
400
1.0
See next table
40
3.5
Operating junction and storage temperature range
T_J, T_STG
- 55 to + 150
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25 °C per Fig. 2. Rating is 200 W above 91 V
(2) Measured at 8.3 ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum
UNIT
W
W
A
A
V
°C
Document Number: 88403 For technical questions within your region, please contact one of the following:
Revision: 20-Oct-08
[e-mail], [e-mail], [e-mail]
www.vishay.com
1