TGL41-6.8 Datasheet, PDF (1/5 Pages) Microsemi Corporation – 500 Watt Transient Voltage Suppressor

TGL41-6.8 thru TGL41-200A
Vishay Semiconductors
formerly General Semiconductor
Surface Mount TRANSZORB^®
Transient Voltage Suppressors
DO-213AB (GL41)
SOLDERABLE ENDS
1st BAND
D2
=
D1
+
-
0
0.008
(0.20)
D2
D1=
0.105
0.095
(2.67)
(2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185(4.7)
1st band denotes type and positive end (cathode)
0.022 (0.56)
0.018 (0.46)
Dimensions in inches
and (millimeters)
Breakdown Voltage 6.8 to 200V
Peak Pulse Power 400W
Mounting Pad Layout
0.049 (1.25) MIN
0.157 (4.00)
MAX
0.118 (3.00) MIN
0.256 (6.50)
REF
Mechanical Data
Case: JEDEC DO-213AB molded plastic body over
passivated junction
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
250°C/10 seconds at terminals
Polarity: Blue bands denotes the cathode which is
positive with respect to the anode under normal TVS
operation
Mounting Position: Any
Weight: 0.0046 oz., 0.166 g
Packaging codes/options:
26/5K per 13" Reel (12mm tape), 60K/box
46/1.5K per 7" Reel (12mm tape), 30K/box
Features
• Plastic package has Underwriters Laboratory
Flammability Classificaion 94V-0
• For surface mounted applications
• Glass passivated junction
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
• 400W peak pulse capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01% (200W above 91V)
• For devices with V(BR)≥10V, ID are typically less
than 1.0µA
• High temperature soldering guaranteed: 250°C/10
seconds at terminals
• Available in unidirectional only
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol
Value
Unit
Peak pulse power dissipation with a
10/1000µs waveform ⁽¹⁾(Fig. 1)
PPPM
Minimum 400
W
Steady state power dissipation at TL = 75°C ⁽²⁾
PM(AV)
1.0
W
Peak pulse current with a 10/1000µs waveform ⁽¹⁾(Fig. 3)
IPPM
See Next Table
A
Peak forward surge current, 8.3 ms single half sine-wave
unidirectional only⁽³⁾
IFSM
40
A
Maximum instantaneous forward voltage at 25A for
unidirectional only
VF
3.5
V
Operating junction and storage temperature range
TJ, TSTG
–55 to +150
°C
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2. Rating is 200W above 91V.
(2) Mounted on copper pads to each terminal of 0.31 in² (8.0 mm²) per Fig. 5
(3) Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum
Document Number 88403
03-May-02
www.vishay.com
1