TGL41-33A-E3-96 Datasheet, PDF (1/5 Pages) Vishay Siliconix – TRANSZorb Transient Voltage Suppressors

www.vishay.com
TGL41-6.8A thru TGL41-200A
Vishay General Semiconductor
TRANSZorb^® Transient Voltage Suppressors
DO-213AB (GL41)
FEATURES
• Plastic MELF package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional polarity only
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
250 °C
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
V_BR uni-directional
V_WM
P_PPM
P_D
I_FSM
6.45 V to 210 V
5.8 V to 171 V
400 W, 200 W
1.0 W
40 A
T_J max.
150 °C
Polarity
Uni-directional
Package
DO-213 AB (GL41)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
MECHANICAL DATA
Case: DO-213AB (GL41)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Blue band denotes the cathode which is positive
with respect to the anode under normal TVS operation
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak pulse power dissipation with a 10/1000 μs waveform ⁽¹⁾ (fig. 1)
P_PPM
400
Power dissipation on infinite heatsink at T_L = 75 °C
Peak pulse current with a 10/1000 μs waveform ⁽¹⁾ (fig. 3)
Peak forward surge current, 8.3 ms half sine-wave uni-directional only ⁽²⁾
P_D
I_PPM
I_FSM
1.0
See next table
40
Maximum instantaneous forward voltage at 25 A for uni-directional only
V_F
3.5
Operating junction and storage temperature range
T_J, T_STG
- 55 to 150
Notes
(1) _{Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2. Rating is 200 W above 91 V}
(2) _{Measured at 8.3 ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum}
UNIT
W
W
A
A
V
°C
Revision: 11-Dec-12
1
Document Number: 88403
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000