TFPTL10 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Radial Leaded PTC - Nickel Thin Film Linear Thermistors

TFPTL
Vishay
Radial Leaded PTC - Nickel Thin Film Linear Thermistors
DESCRIPTION
These thermistors are based on a Nickel thin film resistor
technology as thermal sensitive material. The device
consists of a thin film ceramic chip with two tinned copper
clad steel wire leads.
FEATURES
 Nickel thin film PTC element
 High stability over the entire temperature range
 cUL recognized component: File E148885
 Epoxy coated UL 94 V-0 approved
 Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
Temperature measurement, sensing, compensation and
control in industrial and consumer applications. For on-board
or remote sensing.
MARKING
The thermistors are laser marked with value and tolerance
reference on an epoxy based coating.
(Example: 102F = 10 x 10² = 1000  1 %)
MOUNTING
By soldering or welding in any position.
QUICK REFERENCE DATA
PARAMETER
DESCRIPTION
Resistance value at 25 °C ⁽²⁾
Tolerance on R₂₅-value ⁽²⁾
TCR at 25 °C
Tolerance on TCR at 25 °C ⁽¹⁾
Operating temperature range:
at rated power
at zero dissipation
Response time (in oil)
Dissipation factor  (for information only)
Maximum rated power at 70 °C (P₇₀)
Maximum working voltage RCWV ⁽³⁾
Climatic category (LCT/UCT/days)
Weight
TFPTL10
100 to 1K
1.1
2.9
75
30
0.12
VALUE
± 1; ± 5
4110
± 400
- 55 to + 70
- 55 to + 150
55/150/56
TFPTL15
100 to 5K
1.6
3.4
100
40
0.14
UNIT

%
ppm/K
ppm/K
°C
s
mW/K
mW
V
-
g
STANDARD RESISTANCE VALUES at 25 °C in ⁽²⁾
100
150
220
330
470
680
1K
1.5K
120
180
270
390
560
820
1.2K
1.8K
Notes
(1) _{Contact Vishay if closer TCR lot tolerance is desired}
(2) _{Other R25-values and tolerances are available upon request}
(3) _{Rated continuous working voltage is maximum working voltage or}
P₇₀ x R , whichever is less
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: TFPTL10L1001FL2B
TFPTL 1 0 L 1 0 0 1
2.2K
2.7K
FL
3.3K
3.9K
4.7K
5.0K
2B
PRODUCT
TYPE
TFPT
Leaded
SIZE
10
15
CHARACTERISTIC
L = Linear
RESISTANCE
VALUE
1000 = 100R
1001 = 1K
5001 = 5K
TOLERANCE
F=±1%
J=±5%
LEAD
CONFIGURATION
L2
H5
PACKAGING
B = Bulk (500 pieces)
U = Ammopack (2500 pieces)
T = T/R (4000 pieces)
www.vishay.com
For technical questions, contact: [e-mail]
Document Number: 33027
1
Revision: 25-Oct-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000