TFPTL Datasheet, PDF (1/5 Pages) Vishay Siliconix – Nickel thin film PTC element

www.vishay.com
TFPTL
Vishay
Radial Leaded PTC - Nickel Thin Film Linear Thermistors
DESCRIPTION
These thermistors are based on a Nickel thin film resistor
technology as thermal sensitive material. The device
consists of a thin film ceramic chip with two tinned copper
clad steel wire leads.
FEATURES
• Nickel thin film PTC element
• High stability over the entire temperature range
• cUL recognized component: File E148885
• Epoxy coated UL 94 V-0 approved
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Temperature measurement, sensing, compensation, and
control in industrial and consumer applications. For
on-board or remote sensing.
MARKING
The thermistors are laser marked with value and tolerance
reference on an epoxy based coating.
(Example: 102F = 10 x 10² = 1000 Ω 1 %)
MOUNTING
By soldering or welding in any position.
QUICK REFERENCE DATA
PARAMETER
VALUE
DESCRIPTION
Resistance value at 25 °C ⁽²⁾
Tolerance on R₂₅-value ⁽²⁾
TCR at 25 °C
Tolerance on TCR at 25 °C ⁽¹⁾
TFPTL10
100 to 1K
± 1; ± 5
4110
± 400
Operating temperature range:
at rated power
at zero dissipation
-55 to +70
-55 to +150
Response time (in oil)
≈ 1.1
Dissipation factor δ (for information only)
2.9
Maximum rated power at 70 °C (P₇₀)
75
Maximum working voltage RCWV ⁽³⁾
30
Climatic category (LCT/UCT/days)
55/150/56
Weight
0.12
Notes
(1) _{Contact Vishay if closer TCR lot tolerance is desired}
(2) _{Other R25-values and tolerances are available upon request}
(3) _{Rated continuous working voltage is maximum working voltage or}
P₇₀ x R, whichever is less
STANDARD RESISTANCE VALUES at 25 °C in Ω
100
150
220
330
470
680
120
180
270
390
560
820
Note
• Other R₂₅-values and tolerances are available upon request
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: TFPTL10L1001FL2B
T
F
P
T
L
1
0
L
1
1K
1.2K
1.5K
1.8K
0
0
1
TFPTL15
100 to 5K
≈ 1.6
3.4
100
40
0.14
2.2K
2.7K
F
L
UNIT
Ω
%
ppm/K
ppm/K
°C
s
mW/K
mW
V
-
g
3.3K
3.9K
4.7K
5.0K
2
B
PRODUCT
TYPE
TFPT
Leaded
SIZE
10
15
CHARACTERISTICS
L = Linear
RESISTANCE
VALUE
1000 = 100R
1001 = 1K
5001 = 5K
TOLERANCE
F=±1%
J=±5%
LEAD
CONFIGURATION
L2
H5
PACKAGING
B = Bulk (500 pieces)
U = Ammopack (2500 pieces)
T = T/R (4000 pieces)
Revision: 25-Oct-11
1
Document Number: 33027
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000