T97R106K075LSA Datasheet, PDF (1/7 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT®, Hi-Rel COTS, Ultra-Low ESR, Conformal Coated Case

www.vishay.com
T97
Vishay Sprague
Solid Tantalum Chip Capacitors TANTAMOUNT^®,
Hi-Rel COTS, Ultra-Low ESR, Conformal Coated Case
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
FEATURES
• High reliability; Weibull failure rate grading
available
• Surge current testing per MIL-PRF-55365
options available
• Ultra-low ESR
Available
Available
• Tin/lead (SnPb) termination available
• Mounting: Surface mount
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
Capacitance Range: 10 μF to 1500 μF
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 V_DC to 75 V_DC
ORDERING INFORMATION
T97
R
227
TYPE CASE
CODE
CAPACITANCE
K
CAPACITANCE
TOLERANCE
020
DC VOLTAGE RATING
AT + 85 °C
E
TERMINATION/
PACKAGING
(available options are
series dependent)
S
RELIABILITY
LEVEL
A
SURGE
CURRENT
See
Ratings
and
Case
Code
table
This is expressed in
pF. The first two
digits are the
significant figures.
The third is the
number of zeros
to follow.
K = ± 10 %
M = ± 20 %
This is expressed in
volts. To complete the
three-digit block,
zeros precede the
voltage rating. A
decimal point is
indicated by an “R”
(6R3 = 6.3 V).
E = Sn/Pb solder/
7" (178 mm) reel
L = Sn/Pb solder/
7" (178 mm), 1/2 reel
C = 100 % tin/
7" (178 mm), reel
H = 100 % tin/
7" (178 mm), 1/2 reel
A = 1.0 %
Weibull
B = 0.1 %
Weibull ⁽¹⁾
S = 40 h
burn-in
Z = Non-
established
reliability
A = 10 cycles
at + 25 °C
B = 10 cycles
at - 55 °C/
+ 85 °C
S = 3 cycles
at 25 °C
Notes
(1) _{Available on select ratings. See “Standard Ratings” table.}
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting.
Revision: 25-Jun-13
1
Document Number: 40092
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000