T96 Datasheet, PDF (1/4 Pages) Vishay Siliconix – TANTAMOUNT® Low ESR, Hi-Rel COTS, Built-In Fuse Conformal Coated

T96
Vishay Sprague
TANTAMOUNT^® Low ESR, Hi-Rel COTS, Built-In Fuse
Conformal Coated
FEATURES
• High reliability; Weibull grading available
• Surge Current Testing per MIL-PRF-55365
options available
• Standard and Low ESR options
Pb-free
Available
RoHS*
COMPLIANT
• Terminations: SnPb, Standard. 100 % Tin available
• Circuit protection for mission or safety critical systems
• Fuse characteristics: Guaranteed fuse protection at 9 A,
100 ms
PERFORMANCE/ELECTRICAL CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Range: 10 µF to 680 µF
Capacitance Tolerance: ± 20 %, ± 10 % standard
Voltage Rating: 4 WVDC to 50 WVDC
ORDERING INFORMATION
T96 R
107
K
010
TYPE CASE CAPACITANCE CAPACITANCE DC VOLTAGE
CODE
TOLERANCE RATING AT + 85 °C
See
Ratings
and
Case
Codes
Table.
This is expressed
in picofarads.
The first two
digits are the
significant
figures. The third
is the number of
zeros to follow.
K = ± 10 %
M = ± 20 %
This is expressed in
volts. To complete
the three-digit block,
zeros precede the
voltage rating. A
decimal point is
indicated by an “R”
(6R3 = 6.3 V)
E
TERMINATION AND
PACKAGING
E: Sn/Pb Solder/7"
(178 mm) reels
L: Sn/Pb Solder/7"
(178 mm) ½ reel
C: 100 % Tin/7"
(178 mm) reels
H: 100 % Tin/7"
(178 mm) ½ reel
A
A
RELIABILITY SURGE CURRENT
LEVEL
A = 1.0 %
Weibull
B = 0.1 %
Weibull ⁽¹⁾
S = 40 h
Burn-in
Z = Non-
Established
Reliability
A = 10 cycles at
+ 25 °C
B = 10 cycles at
- 55 °C/+ 85 °C
S = 3 cycles at
+ 25 °C
S
ESR
S = Std
L=
Low
Note: ⁽¹⁾ Weibull 0.1 % may not be available on all ratings. See detailed notes in ratings table or contact marketing for availability
DIMENSIONS in inches [millimeters]
CASE
CODE
R
L
MAX.
D
REF.
B
A
L (MAX.)
0.283
[7.2]
W
0.235 + 0.012/- 0.024
[6.0 + 0.3/- 0.6]
Tantalum Wire
Nib Identifies
W
Anode (+)
Terminal
J
MAX.
J
MAX.
H
H
0.136 ± 0.012
[3.5 ± 0.3]
A
B
0.051 ± 0.012 0.180 ± 0.024
[1.3 ± 0.30]
[4.6 ± 0.6]
D (REF.)
0.243
[6.2]
Note: The anode termination (D less B) will be a minimum of 0.010" (0.25 mm)
* _{Pb containing terminations are not RoHS compliant, exemptions may apply}
J (MAX.)
0.004
[0.1]
Document Number: 40118
Revision: 25-Jun-08
For technical questions, contact: [e-mail]
www.vishay.com
1