T95 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT® Hi-Rel COTS, Conformal Coated Case

T95
Vishay Sprague
Solid Tantalum Chip Capacitors
TANTAMOUNT^® Hi-Rel COTS, Conformal Coated Case
FEATURES
• High reliability; Weibull grading available
• Surge Current Testing per MIL-PRF-55365
options available
• Standard and Low ESR options
• Terminations: SnPb, Standard. 100 % Tin
available
Pb-free
Available
RoHS*
COMPLIANT
PERFORMANCE/ELECTRICAL CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Range: 0.1 µF to 680 µF
Capacitance Tolerance: ± 20 %, ± 10 % standard
Voltage Rating: 4 WVDC to 50 WVDC
ORDERING INFORMATION
T95 D
107
K
010
TYPE CASE CAPACITANCE CAPACITANCE DC VOLTAGE
CODE
TOLERANCE RATING AT + 85 °C
E
TERMINATION AND
PACKAGING
A
A
RELIABILITY SURGE CURRENT
LEVEL
S
ESR
See This is expressed
Ratings in picofarads. The
and first two digits are
Case the significant
Codes figures. The third is
Table. the number of
zeros to follow.
K = ± 10 %
M = ± 20 %
This is expressed in
volts. To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V).
E: Sn/Pb Solder/7"
(178 mm) reels
L: Sn/Pb Solder/7"
(178 mm) ½ reel
C: 100 % Tin/7"
(178 mm) reels
H: 100 % Tin/7"
(178 mm) ½ reel
A = 1.0 %
Weibull
B = 0.1 %
Weibull ⁽²⁾
S = Hi-Rel
Standard
Burn-in
Z = Non-
Established
Reliability
A = 10 cycles at
+ 25 °C
B = 10 cycles at
- 55 °C/+ 85 °C
S = 3 cycles at
+ 25 °C
S = Std
L = Low
Note: (2) Weibull 0.1 % may not be available on all ratings. See detailed notes in ratings table or contact marketing for availability
DIMENSIONS in inches [millimeters]
Tantalum Wire
Nib Identifies
W
Anode (+)
L
Terminal
MAX.
D
REF.
B
A
J
MAX.
J
MAX.
CASE
CODE
B
L (MAX.)
0.158
[4.0]
W
H
0.110 + 0.012 - 0.016 0.075 + 0.012 - 0.024
[2.8 + 0.3 - 0.4]
[1.9 + 0.3 - 0.6]
A
0.031 ± 0.012
[0.80 ± 0.30]
C
0.281
[7.1]
0.126 ± 0.012
[3.2 ± 0.3]
0.098 ± 0.012
[2.5 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.30]
D
0.293
[7.5]
0.170 ± 0.012
[4.3 ± 0.3]
0.110 ± 0.012
[2.8 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.30]
R
0.283
[7.2]
0.235 + 0.012/- 0.024
[6.0 + 0.3/- 0.6]
0.136 ± 0.012
[3.5 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.30]
S
0.143
[3.63]
0.072 ± 0.008
[1.83 ± 0.2]
0.048 ± 0.008
[1.22 ± 0.2]
0.023 ± 0.010
[0.58 ± 0.25]
V
0.143
[3.63]
0.104 ± 0.010
[2.65 ± 0.25]
0.051 ± 0.010
[1.3 ± 0.25]
0.023 ± 0.010
[0.58 ± 0.25]
X
0.285
[7.24]
0.104 ± 0.010
[2.65 ± 0.25]
0.051 ± 0.010
[1.3 ± 0.25]
0.040 ± 0.020
[1.0 ± 0.5]
Y
0.285
[7.24]
0.104 ± 0.010
[2.65 ± 0.25]
0.069 ± 0.010
[1.75 ± 0.25]
0.040 ± 0.020
[1.0 ± 0.5]
Z
0.285
[7.24]
0.104 ± 0.010
[2.65 ± 0.25]
0.104 ± 0.010
[2.65 ± 0.25]
0.040 ± 0.020
[1.0 ± 0.5]
Note: The anode termination (D less B) will be a minimum of 0.010" (0.25 mm)
* _{Pb containing terminations are not RoHS compliant, exemptions may apply}
H
B
0.097 ± 0.016
[2.5 ± 0.4]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
0.085 ± 0.015
[2.16 ± 0.37]
0.085 ± 0.015
[2.16 ± 0.37]
0.200 ± 0.027
[5.08 ± 0.69]
0.200 ± 0.027
[5.08 ± 0.69]
0.200 ± 0.027
[5.08 ± 0.69]
D (REF.)
0.138
[3.5]
0.236
[6.0]
0.253
[6.4]
0.243
[6.2]
0.115
[2.9]
0.115
[2.9]
0.243
[6.2]
0.243
[6.2]
0.243
[6.2]
J (MAX.)
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
Document Number: 40081
Revision: 23-Jan-08
For technical questions, contact: [e-mail]
www.vishay.com
149