T63YA102KT20 Datasheet, PDF (1/5 Pages) Vishay Siliconix – 1/4 Multi-Turn Fully Sealed Container Cermet Trimmer

www.vishay.com
T63
Vishay Sfernice
1/4" Multi-Turn Fully Sealed Container Cermet Trimmer
Due to their square shape and small size (6.8 mm x 6.8 mm
x 5 mm), the multi-turn trimmers of the T63 series are ideally
suited for PCB use, enabling high density board mounting
with reduced space requirement between cards.
Six versions are available differing by the top or side position
of the adjustment screw and by PC pins configuration.
The use of cermet for the resistive track ensures an excellent
stability of nominal specifications throughout life.
DIMENSIONS in millimeters (± 0.5 mm)
T63XA
Ø 0.45
Screwdriver slot
0.5 x 0.5
2.54
2.54
2.3 ± 0.2
T63XB
1.2 ± 0.3
Screwdriver slot
0.5 x 0.5
2.54
2.54
2.54
T63YA
T63YB
Ø 0.45
2.54
2.54
2.3 ± 0.2
1.2 ± 0.3
2.54
2.54
2.54
6.8 ± 0.2 4 min.
6.8 ± 0.2
0.7
Ø 1.8
a
b
c
0.25
5.7 ± 0.1
6.8 ± 0.2 4 min.
6.8 ± 0.2
0.7
Ø 1.8
a
b
c
0.25
5.7 ± 0.1
7.8 max.
6.8 ± 0.2 4 min.
Ø 1.8
6.8 ± 0.2
a
b
c
0.25
6.8 ± 0.2 4 min.
Ø 1.8
6.8 ± 0.2
a
b
c
0.25
FEATURES
• 0.25 W at 70 °C
• Industrial grade
• Tests according to CECC 41000 or IEC 60393-1
• Multi-turn operation
• Low contact resistance variation 1 % typical
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
5 max.
1 ± 0.1
Terminal Spacing on a 2.54 PCB
a
b
c
5 max.
a
b
c
1 ± 0.1
5 max.
1 ± 0.1
a
b
1.3 ± 0.1
c
5 max.
1 ± 0.1
a
b
1.3 ± 0.1
c
T63ZA
T63ZB
6.8 ± 0.2
c
6.8 ± 0.2
Ø 1.8
b ^2.54
a ^2.54
1.3 ± 0.1
c
b
a
3.7
1 ± 0.1
6.8 ± 0.2
c
6.8 ± 0.2
Ø 1.8
b ^2.54
a 2.54
5 max. 4 min.
c
b
a
2.54 3.7
Revision: 05-Aug-13
1
Document Number: 51024
For technical questions, contact: [e-mail], see also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000