T18D108M075EZSS Datasheet, PDF (1/4 Pages) Vishay Siliconix – Wet Tantalum Capacitors, Ultra High Capacitance, Tantalum-Case with Glass-to-Tantalum Hermetic Seal

www.vishay.com
T18
Vishay
Wet Tantalum Capacitors, Ultra High Capacitance, Tantalum-Case
with Glass-to-Tantalum Hermetic Seal for -55 °C to +125 °C
PERFORMANCE CHARACTERISTICS
Refer to: Typical Performance Characteristics
Operating Temperature: -55 °C to +85 °C 
(to +125 °C with voltage derating)
Capacitance Tolerance: ± 10 %, ± 20 % standard
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings table.
FEATURES
• Enhanced performance, high reliability design
• Terminations: axial, standard tin / lead (SnPb),
100 % tin available
Available
• Model T18 tantalum-case electrolytic
capacitors provide all the advantages of
Vishay’s SuperTan^® series devices, while
offering improved reverse voltage and
vibration capability
Available
Available
• Increased thermal shock capability of 300 cycles
• Designed for the avionics and aerospace applications
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
ORDERING INFORMATION
T18
D
108
M
075
E
Z
S
S
MODEL CASE CAPACITANCE CAPACITANCE DC VOLTAGE RATING TERMINATION RELIABILITY INSULATING ESR
CODE
TOLERANCE
AT +85 °C
AND PACKAGING LEVEL
SLEEVE
See
Ratings
and
Case
Codes
table
This is
expressed in
picofarads. The
first two digits
are the
significant
figures. The
third is the
number of
zeros to follow
K = ± 10 %
M = ± 20 %
This is expressed in
volts. To complete the
three-digit block,
zeros precede the
voltage rating
E = tin / lead, bulk,
standard
C = 100 % tin, bulk
Z = non-ER
S = sleeved S = std.
U = unsleeved
Note
• Packaging: the use of formed plastic trays for packing bulk components is standard.
DIMENSIONS in inches [millimeters]
E
L₁
E
D
0.0253 ± 0.002 [0.64 ± 0.05] dia.
(no. 22 AWG) tinned nickel leads
solderable and weldable
Weld
L₂
Tantalum
CASE CODE
TYPE T18
ST
D
L₁
L₂
(max.)
E
WEIGHT (g)
(max.)
A
T1
0.188 ± 0.016
[4.78 ± 0.41]
0.453 + 0.031 / - 0.016
[11.51 + 0.79 / - 0.41]
0.734 [18.64]
1.500 ± 0.250
[38.10 ± 6.35]
2.6
B
T2
0.281 ± 0.016
[7.14 ± 0.41]
0.641 + 0.031 / - 0.016
[16.28 + 0.79 / - 0.41]
0.922 [23.42]
2.250 ± 0.250
[57.15 ± 6.35]
6.2
C
T3
0.375 ± 0.016
[9.52 ± 0.41]
0.766 + 0.031 / - 0.016
[19.46 + 0.79 / - 0.41]
1.047 [26.59]
2.250 ± 0.250
[57.15 ± 6.35]
11.6
D
T4
0.375 ± 0.016
[9.52 ± 0.41]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
1.343 [34.11]
2.250 ± 0.250
[57.15 ± 6.35]
17.7
Note
• For insulated parts, add 0.015" [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body.
Revision: 11-Jan-16
1
Document Number: 40161
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000