STC Datasheet, PDF (1/7 Pages) Vishay Siliconix – Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar

STC
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-Polar
FEATURES
ELECTRICAL CHARACTERISTICS
Operating temperature range: - 55 °C to + 125 °C
Capacitance: Measured at 120 Hz and 25 °C with a
maximum of 2.2 V_DC bias and 1.0 V_rms signal.
Capacitance Tolerance: Standard tolerance is ± 20 % for
ratings 0.1 µF and above, and + 40, - 20 % for ratings below
0.1 µF. Special tolerances are also available.
Dissipation Factor: When measured simultaneously with
capacitance, DF shall not exceed the value shown in the
ratings tables.
DC Leakage Current (DCL Max.):
When measured with DC voltage applied through a 1000 Ω
resistor for 5 min, DC leakage (µA) shall not exceed:
At 25 °C: Leakage current shall not exceed the values listed
in the Standard Ratings Tables
At 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables
At 125 °C and 66 % of Rated Voltage: Leakage current
shall not exceed 15 times the values listed in the Standard
Ratings Tables
Operating Voltage: Full working voltage up to 85 °C. From
85 °C to 125 °C working voltage derates linearly to 66 % of
the 85 °C working voltage
• Subminiature package size and light weight
• Rectangular case with axial or radial leads
• 2 to 35 V_DC
• 0.1 µF to 470 µF
• Operating temperature range: - 55 °C to + 125 °C
• High stability and reliability
• Tested in accordance with MIL-PRF-49137
• Unique and comprehensive custom design capability
APPLICATIONS
• Hearing aids
• Portable communications
• Space/avionics
• Laptop computers
MECHANICAL SPECIFICATIONS
Solder coated nickel leads (type N32 per MIL-STD-1276) are
standard on all case sizes
Leads are weldable and/or solderable
Special leads are available on request (e.g. bare nickel, gold
plated nickel or ribbon leads)
Lead length is 1 1/2" [38.1 mm] minimum on nonpolar parts
On polar parts the negative lead is 1 1/4" [31.8 mm] minimum
and the positive lead is 1 1/2" [38.1 mm] minimum
ORDERING INFORMATION
STC
MODEL
1.0
CAPACITANCE
IN µF
35
DC VOLTAGE RATING
AT + 85 °C
C2
CASE CODE
C = Polar
N = Non-polar
Example of Part Number Code: STC1.0-35C2AM
Note:
(1) _{To complete part number in rating tables, add A or R.}
Change suffix if special capacitance tolerance is required.
A ⁽¹⁾
LEAD
CONFIGURATION
A = Axial
R = Radial
M
CAPACITANCE
TOLERANCE
E = + 40, - 20 %
M = ± 20 %
K = ± 10 %
J= ±5%
Document Number: 43006
Revision: 10-Dec-07
For technical questions, contact: [e-mail]
www.vishay.com
91