SS1P3 Datasheet, PDF (1/5 Pages) Vishay Siliconix – High Current Density Surface Mount Schottky Barrier Rectifiers

New Product
SS1P3 & SS1P4
Vishay General Semiconductor
High Current Density Surface Mount
Schottky Barrier Rectifiers
eSMP ^TM Series
DO-220AA (SMP)
FEATURES
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Low forward voltage drop, low power
losses
• High efficiency
• Low thermal resistance
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
E_AS
V_F
T_J max.
1A
30 V, 40 V
30 A
10 mJ
0.40 V, 0.45 V
150 °C
TYPICAL APPLICATIONS
For use in low voltage high frequency inverters,
freewheeling, dc-to-dc converters, and polarity
protection applications.
(Note: These devices are not Q101 qualified.)
MECHANICAL DATA
Case: DO-220AA (SMP)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (Fig. 1)
Peak forward surge current 10 ms single half sine-wave superimposed
on rated load
V_RRM
I_F(AV)
I_FSM
Non-repetitive avalanche energy at I_AS = 1.5 A, L = 10 mH, T_J = 25 °C
Voltage rate of change (rated V_R)
Operating junction and storage temperature range
E_AS
dV/dt
T_J, T_STG
SS1P3
SS1P4
13
14
30
40
1.0
30
10
10 000
- 55 to + 150
UNIT
V
A
A
mJ
V/µs
°C
ELECTRICAL CHARACTERISTICS (T_A = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
SS1P3
Maximum instantaneous
forward voltage ⁽¹⁾
I_F = 1.0 A
I_F = 1.0 A
T_J = 25 °C
T_J = 125 °C
V_F
Maximum reverse current at rated V_R ⁽²⁾
T_J = 25 °C
T_J = 125 °C
I_R
Typical junction capacitance
4.0 V, 1 MHz
C_J
Notes:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
0.50
0.40
150
15
70
SS1P4
0.53
0.45
UNIT
V
µA
mA
pF
Document Number: 88935 For technical questions within your region, please contact one of the following:
Revision: 19-May-08
[e-mail], [e-mail], [e-mail]
www.vishay.com
1