SS1H9 Datasheet, PDF (1/2 Pages) Vishay Siliconix – High Voltage Surface Mount Schottky Rectifier

DO-214AC
(SMA)
SS1H9 and SS1H10
New Product
Vishay Semiconductors
formerly General Semiconductor
High Voltage Surface Mount
Schottky Rectifier
Cathode Band
Reverse Voltage 90 to 100V
Forward Current 1.0A
0.065 (1.65)
0.049 (1.25)
0.110 (2.79)
0.100 (2.54)
Mounting Pad Layout
Dimensions in inches
and (millimeters)
0.177 (4.50)
0.157 (3.99)
0.012 (0.305)
0.006 (0.152)
0.066 MIN.
(1.68 MIN.)
0.074 MAX.
(1.88 MAX.)
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203) MAX.
0.060 MIN.
(1.52 MIN.)
0.208
(5.28) REF
Mechanical Data
0.208 (5.28)
0.194 (4.93)
Features
Case: JEDEC DO-214AC molded plastic body
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
250°C/10 seconds at terminals
Polarity: Color band denotes cathode end
Weight: 0.002oz., 0.064g
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Low profile surface mount package
• Built-in strain relief • Low power loss, high efficiency
• For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
• Guardring for overvoltage protection
Maximum Ratings and Thermal Characteristics (TA = 25°C unless otherwise noted)
Parameter
Symbol
SS1H9
SS1H10
Unit
Device marking code
S9
S10
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
90
VRMS
63
100
V
70
V
Maximum DC blocking voltage
VDC
90
100
V
Maximum average forward rectified current (see Fig. 1)
IF(AV)
1.0
A
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
50
A
Peak repetitive reverse surge current at tp = 2.0µs, 1KHZ
IRRM
1.0
A
Maximum thermal resistance⁽²⁾
Storage temperature range
RθJA
RθJL
TSTG
88
30
–55 to +175
°C/W
°C
Maximum operating temperature
TJ
175
°C
Electrical Characteristics (TA = 25°C unless otherwise noted)
Maximum instantaneous
IF = 1.0A, TJ = 25°C
0.77
forward voltage at: ⁽¹⁾
IF = 1.0A, TJ = 125°C
IF = 2.0A, TJ = 25°C
VF
0.62
0.86
V
IF = 2.0A, TJ = 125°C
0.70
Maximum DC reverse current
at rated DC blocking voltage⁽¹⁾
TJ = 25°C
TJ = 125°C
IR
1.0
µA
0.5
mA
Notes: (1) Pulse test: 300µs pulse width, 1% duty cycle
(2) P.C.B. mounted with 0.2 x 0.2” (5.0 x 5.0mm) copper pad areas
Document Number 88747
16-Aug-04
www.vishay.com
1