SS12P4C_15 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Schottky Barrier Rectifier

www.vishay.com
SS12P4C
Vishay General Semiconductor
High Current Density Surface Mount
Schottky Barrier Rectifier
eSMP ^® Series
K
1
2
TO-277A (SMPC)
K
Cathode
Anode 1
Anode 2
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
E_AS
V_F at I_F = 6.0 A
T_J max.
Package
2 x 6.0 A
40 V
150 A
20 mJ
0.40 V
125 °C
TO-277A (SMPC)
Diode variations
Dual common cathode
TYPICAL APPLICATIONS
For use in low voltage high frequency inverters,
freewheeling, DC/DC converters and polarity protection
applications.
FEATURES
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
• Low forward voltage drop, low power losses
• High efficiency
• Low thermal impedance
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHM3
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Case: TO-277A (SMPC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS-compliant and
AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant and
AEC-Q101 qualified 
(“_X” denotes revision code e.g. A, B,.....)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix
meets JESD 201 class 2 whisker test

MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (fig. 1) ⁽¹⁾
total device
per diode
V_RRM
I_F(AV)
Maximum average forward rectified current ⁽²⁾
total device
I_F(AV)
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load per diode
I_FSM
Non-repetitive avalanche energy 
at T_J = 25 °C, L = 60 mH per diode
E_AS
Peak repetitive reverse current at t_p = 2 μs, 1 kHz, 
at T_J = 25 °C per diode
I_RRM
Operating junction and storage temperature range
T_J, T_STG
Notes
(1) _{Mounted on 30 mm x 30 mm Al PCB with 50 mm x 25 mm x 100 mm fin heat sink}
(2) _{Free air, mounted on recommended copper pad area}
SS12P4C
S124C
40
12
6.0
3.5
150
20
1.0
-55 to +125
UNIT
V
A
A
A
mJ
A
°C
Revision: 11-Dec-14
1
Document Number: 89141
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000