|
SMR3D Datasheet, PDF (1/3 Pages) Vishay Siliconix – Bulk Metal Foil Technology Precision Molded Surface Mount Resistor | |||
|
SMR3D
Vishay Foil Resistors
Bulk Metal® Foil Technology
Precision Molded Surface Mount Resistor
Product may not
be to scale
The SMR3D is a truly precision molded surface mountable
resistor offering all the elements of precision; including lowest
TCR, tight tolerances, long term stability, low noise, low thermal
EMF, and non-measurable voltage coefficient. It utilizes the
Bulk Metal® Foil technology for the resistive element with its
inherent and legendary low predictable TCR* and long term
stability. This surface mountable product affords similar performance
to the time tested S102 molded through-hole product.
Voltage division with tight tracking < 3ppm can be achieved
with 2 randomly selected units even with a large ratio between
the 2 values.
The molded SMR3D, while slightly larger and heavier than the
Bulk Metal® Foil VSM surface mountable chip resistor, has a
rugged construction capable of withstanding significant thermal
cycling and allows for board installation without concern for
tolerance shifts due to manufacturing processes or mechanical
stresses.
*Reference Reason 1 in â7 Technical Reasons to specify BULK
METAL® FOIL Resistors.â
FEATURES
⢠Performance Similar to Time Tested S102 Through Hole
Resistor
⢠Temperature Coefficient of Resistance â Nominal TCR:
+ 0.6ppm/°C (0°C to + 25°C);
â 0.6ppm/°C (+ 25°C to + 60°C)
+ 2.2ppm/°C (- 55°C to + 25°C)
- 1.8ppm/°C (+ 25°C to + 125°C)
⢠Value Range: 5⦠to 80Kâ¦
⢠Tight Tolerances: available to ± 0.01 percent
⢠Power: 0.6 watts @ + 70°C
⢠Excellent Long Term Stability: ± 0.015%
⢠Low Thermal EMF: 0.1µV/°C maximum
⢠Low Noise, High Frequency Operation
⢠Matched Sets Available
⢠Terminal Finishes Available:
Lead (Pb)-free (Sn 100%)
Tin/Lead Alloy (Sn 60% Pb 40%)
TABLE 1 - TOLERANCE VERSUS RESISTANCE VALUE
VALUE
(â¦)
STANDARD TOLERANCE
(%)
100⦠to 80kâ¦
± 0.01
20⦠to < 100â¦
± 0.02
10⦠to 20â¦
± 0.05
5⦠to 10â¦
± 0.10
FIGURE 1 - NOMINAL TCR
FIGURE 2 - POWER DERATING CURVE
â55
â50
+500
+400
+300
+200
+100
âR
R0
(ppm)
â100
â200
â300
â400
â500
â25
0
-5 ppm
+25
+50
+75 +100 +125
+5 ppm
Nominal Resistance/
Temperature (RT) Curve
+2.2 ppm/°C
Nominal Chord
Slope (TCR)
â1.8 ppm/°C
Nominal Chord
Slope (TCR)
â55°C / +25°C / +125°C are the test points
with +25°C as the reference temperature
Maximum
Spread
±2.3 ppm/°C
Standard
Spread
±2.0 ppm/°C
â55°C
200%
+70°C
175%
150%
125%
100%
75%
50%
25%
0
â50 â25 0 +25 +50 +75 +100 +125 +150 +175 +200
Ambient Temperature (°C)
SALES
⢠ISRAEL: foilsales.israel@vishay.com ⢠FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com ⢠AMERICAS: foilsales.usa@vishay.com
⢠ASIA/JAPAN: foilsales.asia@vishay.com ⢠UK/HOLLAND/SCANDANAVIA: foilsales.eunorth@vishay.com ⢠GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
www.vishay.com
20
For technical questions in the Americas, contact foilsupport1@vishay.com
Document Number: 63021
For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 16-Aug-04
|
▷ |