SMP24A-M3-84A Datasheet, PDF (1/5 Pages) Vishay Siliconix – Surface Mount TRANSZORB® Transient Voltage Suppressors

www.vishay.com
SMP3V3 thru SMP36A
Vishay General Semiconductor
Surface Mount TRANSZORB^®
Transient Voltage Suppressors
eSMP ^® Series
DO-220AA (SMP)
PRIMARY CHARACTERISTICS
V_BR uni-directional
V_WM
P_PPM
I_FSM
T_J max.
Polarity
4.10 V to 44.2 V
3.3 V to 36 V
400 W
40 A
150 °C
Uni-directional
Package
DO-220AA (SMP)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
FEATURES
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Available in uni-directional
• 400 W peak pulse power capability with a
10/1000 μs waveform
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) ⁽¹⁾⁽²⁾
Peak pulse current with a 10/1000 μs waveform ⁽¹⁾
Peak forward surge current 10 ms single half sine-wave ⁽²⁾
Maximum instantaneous forward voltage at 25 A ⁽³⁾
Operating junction and storage temperature range
SYMBOL
P_PPM
I_PPM
I_FSM
V_F
T_J, T_STG
Notes
(1) _{Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2}
(2) _{Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal}
(3) _{Pulse test: 300 μs pulse width, 1 % duty cycle}
VALUE
400
See table next page
40
2.5
- 55 to + 150
UNIT
W
A
A
V
°C
Revision: 11-Dec-12
1
Document Number: 88481
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000