SMP11 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Surface Mount TRANSZORB Transient Voltage Suppressors

SMP11 thru SMP36A
New Product _{Vishay General Semiconductor}
Surface Mount TRANSZORB^® Transient Voltage Suppressors
DO-220AA (SMP)
MAJOR RATINGS AND CHARACTERISTICS
V_WM
P_PPM
I_FSM
T_j max.
11 V to 36 V
400W
40 A
150 °C
FEATURES
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Available in Unidirectional
• 400 W peak pulse power capability with a
10/1000 µs waveform
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020C
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MECHANICAL DATA
Case: DO-220AA (SMP)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Peak pulse power dissipation with a 10/1000 µs waveform ^(1,2) (Fig. 1)
Peak pulse current with a 10/1000 µs waveform ⁽¹⁾
Peak forward surge current 10 ms single half sine-wave ⁽²⁾
Maximum instantaneous forward voltage at 25 A ⁽³⁾
P_PPM
I_PPM
I_FSM
V_F
Operating junction and storage temperature range
T_J, T_STG
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25 °C per Fig. 2
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
(3) Pulse test: 300 µs pulse width, 1 % duty cycle
VALUE
400
see table next page
40
2.5
- 55 to + 150
UNIT
W
A
A
V
°C
Document Number 88481
26-Jul-06
www.vishay.com
1