|
SMNZ Datasheet, PDF (1/5 Pages) Vishay Siliconix – Ultra High Precision Z-Foil Surface Mount 4 Resistor Network | |||
|
SMNZ (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Surface Mount 4 Resistor Network
Dual-In-Line Package with TCR Tracking of 0.1 ppm/°C, PCR
Tracking of 5 ppm at Rated Power, and Tolerance Match of 0.01 %
FEATURES
CT Any value and any ratio available within resistance range
U INTRODUCTION
The Z-Foil Technology provides a significant reduction of the
D resistive componentsâ sensitivity to ambient temperature
variations (TCR) and applied power changes (PCR).
0.05 ppm/°C Absolute TCR removes errors due to
temperature gradients.
O Model SMNZ offers extremely low TCR (absolute and
tracking), excellent load life stability, tight tolerance (absolute
and matching), excellent ratio stability, low current noise, low
R voltage coefficient and non sensitivity to ESD - all in the
same resistor.
The SMNZ Surface Mount Network is made up of 4
P independent Bulk Metal® Z-Foil resistors in a small standard
molded epoxy package with 50 MIL lead pitch (JEDEC
MS-012 package).
The electrical specification of this integrated construction
offers improved performance and better real estate utilization
D over discrete resistors and matched sets. The resistor may
be used independently or as divider pairs.
Our Application Engineering Department is available to
E advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
V APPLICATIONS
⢠Instrumentation Amplifiers
O ⢠Bridge Networks
⢠Differential Amplifiers
V1
⢠Ratio Arms in Bridge Circuits V2
⢠Medical and Test Equipment
R ⢠Military
⢠Airborne etc
R2
R1
-
+
R1
R2
Vout
SMNZ
⢠Temperature Coefficient of Resistance (TCR):
Absolute: ± 0.05 ppm/°C typical (0 °C to + 60 °C)
Pb-free
± 0.2 ppm/°C typical (-55 °C to + 125 °C, Available
+ 25 °C Ref.) (see table 1)
Tracking: 0.1 ppm/°C typical (see table 1)
RoHS*
⢠Tolerance Match: 0.01 %
COMPLIANT
⢠Power Coefficient Tracking - âR2 -R1 due to self heatingâ:
5 ppm at Rated Power
⢠Power Rating: at 70 °C
Entire Package: 0.4 W
Each Resistor: 0.1 W
⢠Ratio Stability: 0.005 % (0.1 W at 70 °C, 2000 hours)
⢠Large Variety of Resistance Ratios
⢠Electrostatic Discharge (ESD) above 25 000 Volts
⢠Short Time Overload ⤠0.0025 %
⢠Non Inductive, Non Capacitive Design
⢠Rise Time: 1 ns without ringing
⢠Current Noise: < - 40 dB
⢠Voltage Coefficient < 0.1 ppm/V
⢠Non Inductive: < 0.08 µH
⢠Non Hot Spot Design
⢠Terminal Finishes available: Lead (Pb)-free
Tin/Lead Alloy
⢠For better performances please contact us
⢠Any value available within resistance range (e.g. 1K2345)
⢠Prototype samples available from 48 hours. For more
information, please contact foil@vishay.com
FIGURE 1 - SCHEMATICS
R1 R1 R1 R1
OPTION 1
FOUR RESISTORS, SAME OHMIC VALUE
SAME ABSOLUTE TOLERANCE
R1 R2 R2 R1
OPTION 2
TWO RESISTOR PAIRS
Note
R1/R2; R2/R1
1. Different schematics are available (R1, R2, R3, R4)
P TABLE 1 - MODEL SMNZ SPECIFICATIONS
MODEL
IMSMNZ
RESISTANCE
VALUES1)
ABSOLUTE TCR
(- 55 °C TO + 125 °C, + 25 °C REF.)
(TYPICAL + MAX. SPREAD)
100 Ω - 1 kΩ
1 kΩ - 10 kΩ
± 0.2 ± 2.8
± 0.2 ± 1.8
RESISTANCE
RATIO
R1/R2 = 1
1 < R1/R2 ⤠10
10 < R1/R2 ⤠100
TCR TRACKING
MAX.
0.5 ppm/°C
1.0 ppm/°C
2.0 ppm/°C
TOLERANCE
ABSOLUTE MATCH
± 0.02 %
± 0.05 %
± 0.1 %
0.01 %
0.02 %
0.05 %
Note
1. SMN (Classic Foil) available with values up to 20 kΩ
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
1
For any questions, contact: foil@vishay.com
Document Number: 63117
Revision: 22-May-07
|
▷ |