SMF5V0A_08 Datasheet, PDF (1/7 Pages) Vishay Siliconix – Surface Mount ESD Protection Diodes

SMF5V0A to SMF51A
Vishay Semiconductors
Surface Mount ESD Protection Diodes
Features
• For surface mounted applications
• Low-profile package
• Optimized for LAN protection applications
• Ideal for ESD protection of data lines in
accordance with IEC 61000-4-2
(IEC 801-2)
• Ideal for EFT protection of data lines in
accordance with IEC 61000-4-4 (IEC 801-4)
• IEC 61000-4-2 (ESD) 15 kV (air) 8 kV (contact)
• Low incremental surge resistance, excellent
clamping capability
• 200 W peak pulse power capability with a
10/1000 µs waveform, repetition rate (duty cycle):
0.01 %
• Very fast response time
• High temperature soldering guaranteed:
260 °C/10 s at terminals
• AEC Q101 qualified
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21
17249
Mechanical Data
Case: JEDEC DO-219AB (SMF^®) plastic case
Terminals: Solder plated, solderable per
MIL-STD-750, method 2026
Polarity: The band denotes the cathode which is
positive with respect to the anode under normal TVS
operation
Mounting position: any
Weight: approx. 15 mg
Ordering Information/Packaging Codes
SMF5V0A-GSxx
GS08 = 3K per 7" reel (8 mm tape)
GS18 = 10K per 13" reel (8 mm tape)
Part number
SMF5V0A-M-xx
08 = 3K per 7" reel (8 mm tape)
18 = 10K per 13" reel (8 mm tape)
Environmental suffix -M- defines halogen-free
Part number
Absolute Maximum Ratings
T_amb = 25 °C, unless otherwise specified
Parameter
Test conditions
Symbol
Value
Unit
10/1000 µs waveform ¹⁾
P_PPM
200
W
Peak pulse power dissipation
8/20 µs waveform ¹⁾
P_PPM
1000
W
Peak pulse current
10/1000 µs waveform ¹⁾
I_PPM
Next table
A
Peak forward surge current
8.3 ms single half sine-wave
I_FSM
20
A
Note
1) _{Non-repetitive current pulse and derated above TA = 25 °C}
Document Number 85811
Rev. 2.3, 27-Oct-08
For technical support, please contact: [e-mail]
www.vishay.com
1