SM6T_08 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Surface Mount TRANSZORB® Transient Voltage Suppressors

SM6T Series
Vishay General Semiconductor
Surface Mount TRANSZORB^® Transient Voltage Suppressors
DO-214AA (SMB)
PRIMARY CHARACTERISTICS
V_BR
P_PPM
P_D
I_FSM (uni-directional only)
T_J max.
6.8 V to 220 V
600 W
5.0 W
100 A
150 °C
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g.
SM6T12CA).
Electrical characteristics apply in both directions.
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• 600 W peak pulse power capability with a
10/1000 µs waveform
• Available in uni-directional and bi-directional
• Excellent clamping capability
• Low inductance
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MECHANICAL DATA
Case: DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation on 10/1000 µs waveform ⁽¹⁾⁽²⁾ (Fig. 1)
Peak power pulse current with a 10/1000 µs waveform ⁽¹⁾ (Fig. 3)
Power dissipation on infinite heatsink T_A = 50 °C
Peak forward surge current 10 ms single half sine-wave uni-directional only ⁽²⁾
Operating junction and storage temperature range
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25 °C per Fig. 2
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
SYMBOL
P_PPM
I_PPM
P_D
I_FSM
T_J, T_STG
VALUE
600
See next table
5.0
100
- 65 to +150
UNIT
W
A
W
A
°C
Document Number: 88385 For technical questions within your region, please contact one of the following:
Revision: 21-Oct-08
[e-mail], [e-mail], [e-mail]
www.vishay.com
1