|
SIP32472 Datasheet, PDF (1/13 Pages) Vishay Siliconix – Reverse current blocking when disabled | |||
|
www.vishay.com
SiP32472
Vishay Siliconix
46 mï, Slew Rate Controlled Load Switch
in uDFN4 1.1 mm x 1.1 mm
DESCRIPTION
The SiP32472 is a slew rate controlled integrated high side
load switch that operates in the input voltage range from
1.2 V to 5.5 V.
This design features slew rate control, reverse blocking,
output discharge, and control logic pull down. The device is
logic high enabled.
The SiP32472 is available in uDFN4 1.1 mm x 1.1 mm
package.
FEATURES
⢠Low input voltage, 1.2 V to 5.5 V
⢠Low Ron, 46 mï/typ. at 5 V
⢠Slew rate control
⢠Low logic control
⢠Reverse current blocking when disabled
Available
⢠Integrated output discharge switch
⢠Integrated pull down resistor at âENâ
⢠uDFN4 1.1 mm x 1.1 mm package
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
⢠Smart phones
⢠GPS and portable media players
⢠Tablet computer
⢠Medical and healthcare equipment
⢠Industrial and instrument
⢠Game console
DEVICE OPTIONS
PART NUMBER
EN/PULL
Ron
(mï)
ton
(μs)
td(off)
REVERSE
BLOCKING
RDISCHARGE
ENLOGIC
DOWN
RESISTOR
(ï)
SiP32472DN-T1-GE3
46
200
2
Y
Y
High enable
2M
TYPICAL APPLICATION CIRCUIT
VIN
CIN
IN
OUT
SiP32472
EN
EN
GND
VOUT
COUT
GND
GND
Fig. 1 - Typical Application Circuit
S13-1349-Rev. B, 03-Jun-13
1
Document Number: 62512
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |