SIP32467 Datasheet, PDF (1/13 Pages) Vishay Siliconix – 50 mΩ, Slew Rate Controlled Load Switch in WCSP

www.vishay.com
SiP32467, SiP32468
Vishay Siliconix
50 mΩ, Slew Rate Controlled Load Switch in WCSP
DESCRIPTION
The SiP32467 and SiP32468 are slew rate controlled
integrated high side load switches that operate in the input
voltage range from 1.2 V to 5.5 V.
This series of design features slew rate control, reverse
blocking when switch is off, output discharge, and control
logic pull up. The devices are logic low enabled.
The SiP32467 and SiP32468 are available in compact
wafer level WCSP package, WCSP4 0.76 mm x 0.76 mm
with 0.4 mm pitch.
FEATURES
• Low input voltage, 1.2 V to 5.5 V
• Low R_on, 54 mΩ/typ. at 3 V
• Slew rate control
• Compatible with 1.2 V to 3.3 V logic
• Reverse current blocking when switch is off
Available
• Integrated output discharge switch (SiP32468)
• Integrated pull up resistor at “EN”
• For enable “High” see SiP32460, SiP32461, and SiP32462
• 4-bump WCSP package
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Smart phones
• GPS and portable media players
• Tablet computers
• Medical and healthcare equipment
• Industrial and instrumentation
• Game consoles
TYPICAL APPLICATION CIRCUIT
V_IN
IN
OUT
SiP32467, SiP32468
C_IN
EN
EN
GND
V_OUT
C_OUT
GND
GND
Fig. 1 - Typical Application Circuit
S14-0843-Rev. B, 28-Apr-14
1
Document Number: 67757
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000