SIP32460 Datasheet, PDF (1/16 Pages) Vishay Siliconix – 50 m, Slew Rate Controlled Load Switch in WCSP

www.vishay.com
SiP32460, SiP32461, SiP32462
Vishay Siliconix
50 m, Slew Rate Controlled Load Switch in WCSP
DESCRIPTION
The SiP32460, SiP32461, and SiP32462 are slew rate
controlled integrated high side load switches that operate in
the input voltage range from 1.2 V to 5.5 V.
This series of design feature slew rate control, reverse
blocking, output discharge, and control logic pull down. The
devices are logic high enabled.
The SiP32460, SIP32461, and SiP32462 are available
in compact wafer level WCSP package, WCSP4
0.76 mm x 0.76 mm with 0.4 mm pitch.
FEATURES
• Low input voltage, 1.2 V to 5.5 V
• Low R_on, 54 m/typ. at 3 V
• Slew rate control
• Low logic control
• 7.5 μs turn-on time at 5 V (SiP32462)
Available
• Reverse current blocking when disabled
• Integrated output discharge switch (SiP32461)
• Integrated pull down resistor at “EN”
• 4-bump WCSP package
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Smart phones
• GPS and portable media players
• Tablet computer
• Medical and healthcare equipment
• Industrial and instrument
• Game console
DEVICE OPTIONS
PART NUMBER
R_on
t_on
(m)
(μs)
SiP32460DB-T2-GE1
54
200
SiP32461DB-T2-GE1
54
200
SiP32462DB-T2-GE1
54
7.5

TYPICAL APPLICATION CIRCUIT
t_d(off)
2
2
2
REVERSE
BLOCKING
Y
Y
Y
R_DISCHARGE
N
Y
N
EN_LOGIC
High enable
High enable
High enable
EN/PULL
DOWN
RESISTOR
()
2M
2M
2M
V_IN
IN
OUT
V_OUT
SiP32460, SiP32461, SiP32462
C_IN
EN
EN
GND
C_OUT
GND
GND
Fig. 1 - Typical Application Circuit
S13-1347-Rev. C, 03-Jun-13
1
Document Number: 67754
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000