|
SIP32431 Datasheet, PDF (1/12 Pages) Vishay Siliconix – 1.0 A Slew Rate Controlled Load Switch with Reverse Blocking in SC70-6, and TDFN4 1.2 mm x 1.6 mm | |||
|
SiP32431
Vishay Siliconix
1.0 A Slew Rate Controlled Load Switch with Reverse Blocking in
SC70-6, and TDFN4 1.2 mm x 1.6 mm
DESCRIPTION
The SiP32431 is a slew rate controlled high side switch with
reverse blocking capability. The switch is of a low ON
resistance p-channel MOSFET that supports continuous
current up to 1.0 A.
The SiP32431 operates with an input voltage from 1.5 V to
5.5 V.
The SiP32431 features low input logic level to interface with
low control voltage from microprocessors. This device has a
very low operating current, typically 50 pA.
The SiP32431 is available in lead (Pb)-free package options
including 6 pin SC70-6, and 4 pin TDFN4 1.2 mm x 1.6 mm
DFN4 packages. The operation temperature range is
specified from - 40 °C to + 85 °C.
The SiP32431 compact package options, operation voltage
range, and low operating current make it a good fit for battery
power applications.
FEATURES
⢠1.5 V to 5.5 V input voltage range
⢠Very low RDS(on), typically 105 mï at 5 V and
135 mï at 3 V for TDFN4 1.2 mm x 1.6 mm
package
⢠Typical 147 mï at 5 V and 178 mï at 3 V for
SC70-6 package
⢠Slew rate controlled turn-on time: 100 µs
⢠Low quiescent current < 1 µA
⢠Low shutdown current < 1 µA
⢠Reverse blocking capability
⢠SC70-6 and TDFN4 1.2 mm x 1.6 mm packages
⢠Compliant to RoHS Directive 2002/95/EC
⢠Halogen-free according to IEC 61249-2-21 definition
APPLICATIONS
⢠Cellular telephones
⢠Digital still cameras
⢠Personal digital assistants (PDA)
⢠Hot swap supplies
⢠Notebook computers
⢠Personal communication devices
⢠Portable Instruments
TYPICAL APPLICATION CIRCUIT
VIN
C IN
1 µF
IN
OUT
SiP32431
ON/OFF
ON/OFF
GND
GND
Figure 1 - SiP32431 Typical Application Circuit
VOUT
C OUT
0.1 µF
GND
Document Number: 66597
S11-0175-Rev. B, 07-Feb-11
www.vishay.com
1
|
▷ |