SIC714CD10 Datasheet, PDF (1/10 Pages) Vishay Siliconix – Fast Switching MOSFETs With Integrated Driver

SiC714CD10
Vishay Siliconix
Fast Switching MOSFETs With Integrated Driver
PRODUCT SUMMARY
Input Voltage Range
Output Voltage Range
Operating Frequency
Continuous Output Current
Peak Efficiency
Optimized Duty Cycle Ratio
3.3 to 15 V
0.5 to 6 V
100 kHz to 1 MHz
Up to 27 A
> 94 % at 300 kHz
10 %
PowerPAK MLF 10 x 10
1
Bottom View
Ordering Information: SiC714CD10-T1
SiC714CD10-T1-E3 (Lead (Pb)-free)
*see page 2 for peak temperature
DESCRIPTION
The SiC714CD10 is an integrated solution which contains
two PWM-optimized MOSFETs (high side and low side
MOSFETs) and a driver IC. Integrating the driver allows bet-
ter optimization of Power MOSFETs. This minimizes the
losses and provides better performance at higher frequency.
FUNCTIONAL BLOCK DIAGRAM
V_DD
SHDN
UVLO
PWM
SYNC
CGND
FEATURES
• Low-side MOSFET control pin for
prebias start-up
• Undervoltage Lockout for safe operation
• Internal boostrap diode reduces
component count
• Break-Before-Make operation
• Turn-on/Turn-off Capability
• Compatible with any single or multi-phase PWM
controller
• Low profile, thermally enhanced PowerPAK^® MLF
10 x 10 Package
APPLICATIONS
• DC-to-DC Point-of-Load Converters
- 3.3 V, 5 V, or 12 V Intermediate BUS
- Examples
- 12 V_IN/0.8 - 2.5 V_OUT
- 5 V_IN/0.8 - 1.5 V_OUT
• Servers and Computers
• Single and Multi-Phase Conversion
The SiC714CD10 is packed in Vishay Siliconix’s high perfor-
mance PowerPAK MLF 10 x 10 package. Compact copack-
ing of components helps to reduce stray inductance, and
hence increases efficiency.
+
- _BBM
V_DD
C_BOOT
V_IN
SW
PGND
Figure 1.
* Pb containing terminations are not RoHS compliant, exemptions may apply.
Document Number: 73569
S-62659–Rev. C, 25-Dec-06
www.vishay.com
1