SIC620R Datasheet, PDF (1/18 Pages) Vishay Siliconix – 60 A VRPower Integrated Power Stage

www.vishay.com
SiC620R, SiC620AR
Vishay Siliconix
60 A VRPower^® Integrated Power Stage
DESCRIPTION
The SiC620R and SiC620AR are integrated power stage
solutions optimized for synchronous buck applications to
offer high current, high efficiency, and high power density
performance. Packaged in Vishay’s proprietary 5 mm x 5 mm
MLP package, SiC620R and SiC620AR enables voltage
regulator designs to deliver up to 60 A continuous current
per phase.
The internal power MOSFETs utilizes Vishay’s
state-of-the-art Gen IV TrenchFET technology that delivers
industry benchmark performance to significantly reduce
switching and conduction losses.
The SiC620R and SiC620AR incorporates an advanced
MOSFET gate driver IC that features high current driving
capability, adaptive dead-time control, an integrated
bootstrap Schottky diode, a thermal warning (THWn) that
alerts the system of excessive junction temperature, and
zero current detect to improve light load efficiency. The
drivers are also compatible with a wide range of PWM
controllers and supports tri-state PWM, 3.3 V (SiC620AR) /
5 V (SiC620R) PWM logic.
FEATURES
• Thermally enhanced PowerPAK^® MLP55-31L
double cooling package
• Vishay’s Gen IV MOSFET technology and a
low-side MOSFET with integrated Schottky
diode
• Delivers up to 60 A continuous current
• 95 % peak efficiency
• High frequency operation up to 1.5 MHz
• Power MOSFETs optimized for 12 V input stage
• 3.3 V (SiC620AR) / 5 V (SiC620R) PWM logic with tri-state
and hold-off
• Zero current detect control for light load efficiency
improvement
• Low PWM propagation delay (< 20 ns)
• Thermal monitor flag
• Under voltage lockout for V_CIN
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Multi-phase VRDs for CPU, GPU, and memory
TYPICAL APPLICATION DIAGRAM
5V
V_IN
PWM
controller
V_CIN
ZCD_EN#
DSBL#
PWM
THWn
Gate
driver
BOOT
PHASE
V_SWH
V_OUT
Fig. 1 - SiC620R and SiC620AR Typical Application Diagram
S14-2189, Rev. A 03-Nov-14
1
Document Number: 63589
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000