SIA427DJ Datasheet, PDF (1/9 Pages) Vishay Siliconix – P-Channel 8 V (D-S) MOSFET

New Product
P-Channel 8 V (D-S) MOSFET
SiA427DJ
Vishay Siliconix
PRODUCT SUMMARY
V_DS (V)
-8
R_DS(on) ()
0.016 at V_GS = - 4.5 V
0.0215 at V_GS = - 2.5 V
0.026 at V_GS = - 1.8 V
0.032 at V_GS = - 1.5 V
0.095 at V_GS = - 1.2 V
I_D (A)
- 12^a
- 12^a
- 12^a
- 12^a
-3
Q_g (Typ.)
30 nC
PowerPAK SC-70-6L-Single
D
6
D
5
2.05 mm ^S
4
1
D
2
D
3
G
S
2.05 mm
Ordering Information:
SiA427DJ-T4-GE3 (Lead (Pb)-free and Halogen-free)
SiA427DJ-T1-GE3 (Lead (Pb)-free and Halogen-free)
FEATURES
• TrenchFET^® Power MOSFET
• New Thermally Enhanced PowerPAK^®
SC-70 Package
- Small Footprint Area
- Low On-Resistance
• 100 % R_g Tested
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Load Switch, for 1.2 V Power Line for
Portable and Handheld Devices
S
Marking Code
Part # code
BNX
XXX
Lot Traceability
and Date code
G
D
P-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS (T_A = 25 °C, unless otherwise noted)
Parameter
Symbol
Limit
Unit
Drain-Source Voltage
Gate-Source Voltage
V_DS
-8
V
V_GS
±5
T_C = 25 °C
- 12^a
Continuous Drain Current (T_J = 150 °C)
T_C = 70 °C
T_A = 25 °C
I_D
- 12^a
- 12^{a, b, c}
T_A = 70 °C
- 9.9^{b, c}
A
Pulsed Drain Current
Continuous Source-Drain Diode Current
I_DM
T_C = 25 °C
T_A = 25 °C
I_S
- 50
- 12^a
- 2.9^{b, c}
T_C = 25 °C
19
Maximum Power Dissipation
T_C = 70 °C
T_A = 25 °C
P_D
12
3.5^{b, c}
W
T_A = 70 °C
2.2^{b, c}
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)^{d, e}
T_J, T_stg
- 55 to 150
°C
260
THERMAL RESISTANCE RATINGS
Parameter
Symbol
Typical
Maximum
Unit
Maximum Junction-to-Ambient^{b, f}
Maximum Junction-to-Case (Drain)
t5s
R_thJA
28
Steady State
R_thJC
5.3
36
°C/W
6.5
Notes:
a. Package limited
b. Surface mounted on 1" x 1" FR4 board.
c. t = 5 s.
d. See solder profile (www.vishay.com/doc?73257). The PowerPAK SC-70 is a leadless package. The end of the lead terminal is exposed
copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and
is not required to ensure adequate bottom side solder interconnection.
e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components.
f. Maximum under steady state conditions is 80 °C/W.
Document Number: 66711
For more information please contact: [e-mail]
www.vishay.com
S12-1141-Rev. C, 21-May-12
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000