SFP Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film Top-Contact Resistor with Part Mark

www.vishay.com
SFP
Vishay Electro-Films
Thin Film Top-Contact Resistor with Part Mark
Product may not be to scale
The SFP series single-value resistor chips offer a small size,
wide ohmic value range and excellent power capacity.
The SFPs are part marked with resistance value allowing
user the ability to visually determine the resistance value of
the chip.
The SFPs are manufactured using Vishay Electro-Films (EFI)
sophisticated thin film equipment and manufacturing
technology.
The SFPs are 100 % electrically tested and visually
inspected to MIL-STD-883, method 2032 class H or K.
FEATURES
• Wire bondable
• Part marked - 5 digits
• Small size: 0.022 inches square
• Case: 0202
• Resistance range: 1  to 1 M
• DC power rating: 250 mW
• Oxidized silicon substrate for good power dissipation
• Resistor material: Tantalum nitride, self passivating
• Moisture resistant
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Vishay EFI SFP small resistor chips are widely used in hybrid
packages where space is limited and chip value marking is
important for identification. The die is part marked with the
resistance value. Wire bonding is made to the two pads on
the top of the chip.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
Total Resistance Range
1 to 1M
Standard Tolerances
± 0.1, ± 0.5, ± 1
TCR
± 25, ± 50, ± 100, ± 250
Tightest Standard Tolerance Available
1 % 0.5 %
0.1 %
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
± 250 ppm/°C
UNIT

%
ppm/°C
1 Ω 10 Ω 30 Ω 100 Ω
200 k Ω 430 k Ω 620 k Ω 1 MΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
100  - 250 k
< 100  or > 251 k
Moisture Resistance, MIL-STD-202, Method 106
Stability, 1000 h, + 125 °C, 125 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 70 °C (Derated to zero at + 175 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
Note
• Values above 1M available
VALUE
- 35 typ.
- 20 typ.
± 0.5 max. R/R
± 0.25 max. R/R
- 55 to + 125
± 0.25 max. R/R
± 0.5 max. R/R
200
10¹² min.
100 V max.
0.250
± 0.25 max. R/R
UNIT
dB
%
%
°C
%
%
V

V
W
%
Revision: 04-Mar-13
1
Document Number: 61000
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000