SFM Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film Top-Contact Resistor

www.vishay.com
SFM
Vishay Electro-Films
Thin Film Top-Contact Resistor
Product may not be to scale
The SFM series single-value resistor chips offer a small size,
wide ohmic value range and excellent power capacity.
The SFMs tantalum nitride resistor material offers excellent
resistance to high moisture environments.
The SFMs are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The SFMs are 100 % electrically tested and
visually inspected to MIL-STD-883.
FEATURES
• Wire bondable
• Small size: 0.020 inches square
• Case: 0202
• Resistance range: 1.0  to 1 M
• DC power rating: 250 mW
• Oxidized silicon substrate for good power dissipation
• Resistor material tantalum nitride, self passivating
• Moisture resistant
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Vishay EFI SFM top-contact resistor chips are designed to
handle substantial power loads in many types of hybrid
packages. They are ideally suited for this purpose because
of their small size.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
Total Resistance Range
1 to 1M
Standard Tolerances
± 0.1, ± 0.5, ± 1
TCR
± 25, ± 50, ± 100, ± 250
Tightest Standard Tolerance Available
1 % 0.5 %
0.1 %
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
± 250 ppm/°C
UNIT

%
ppm/°C
1 Ω 10 Ω 30 Ω 100 Ω
200 kΩ 360 kΩ 620 kΩ 1 MΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
100  to 250 k
< 100  or > 251 k
Moisture Resistance, MIL-STD-202 Method 106
Stability, 1000 h, + 125 °C, 125 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 70 °C (Derated to zero at + 175 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
VALUE
- 35 typ.
- 20 typ.
± 0.5 max. R/R
± 0.25 max. R/R
- 55 to + 150
± 0.25 max. R/R
± 0.5 max. R/R
200
10¹² min.
100 max.
0.250
± 0.25 max. R/R
UNIT
dB
%
%
°C
%
%
V

V
W
%
Revision: 25-Feb-13
1
Document Number: 61017
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000