SFH6701 Datasheet, PDF (1/16 Pages) Vishay Siliconix – High Speed Optocoupler, 5 MBd, 1 kV/us dV/dt

VISHAY
SFH6700/ 01/ 02/ 05/ 11/ 12/ 19
Vishay Semiconductors
High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt
Features
• Data Rate 5.0 MBits/s
(2.5 MBit/s over Temperature)
• Buffer
• Isolation Test Voltage, 5300 V RMS for 1.0 s
• TTL, LSTTL and CMOS Compatible
• Internal Shield for Very High Common Mode
Transient Immunity
• Wide Supply Voltage Range (4.5 to 15 V)
• Low Input Current (1.6 mA to 5.0 mA)
• Three State Output (SFH6700/ 19)
• Totem Pole Output (SFH6701/ 02/ 11/ 12)
• Open Collector Output (SFH6705)
• Specified from 0 °C to 85 °C
Agency Approvals
• UL - File No. E52744 System Code H or J
SFH6700/6719
NC ¹
8 VCC
A2
7 VO
C3
6 VE
NC 4
5 GND
SFH6701/6711
NC ¹
8 VCC
A2
7 VO
C3
6 NC
NC 4
5 GND
SFH6702/6712
NC ¹
8 VCC
SFH6705
NC ¹
8 VCC
A2
7 NC
A2
7 NC
C3
6 VO
C3
6 VO
NC 4
5 GND
NC 4
i179073
5 GND
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
Industrial Control
Replace Pulse Transformers
Routine Logic Interfacing
Motion/Power Control
High Speed Line Receiver
Microprocessor System Interfaces
Computer Peripheral Interfaces
Description
The SFH67xx high speed optocoupler series consists
of a GaAlAs infrared emitting diode, optically coupled
with an integrated photo detector. The detector incor-
porates a Schmitt-Trigger stage for improved noise
immunity. Using the Enable input, the output can
switched to the high ohmic state, which is necessary
for data bus applications. A Faraday shield provides a
common mode transient immunity of 1000 V/µ at
V_CM = 50 V for SFH6700/ 01/ 02/ 05 and 2500 V/µ at
V_CM = 400 V for SFH6711/ 12/ 19.
The SFH67xx uses an industry standard DIP-8 pack-
age.With standard lead bending, creepage distance
and clearance of ≥ 7.0 mm with lead bending options
6, 7, and 9 ≥ 8 mm are achieved.
Order Information
Part
SFH6700
SFH6701
SFH6702
SFH6705
SFH6711
SFH6712
SFH6719
SFH6700-X009
SFH6701-X006
SFH6701-X007
SFH6701-X009
SFH6705-X006
SFH6705-X007
SFH6711-X007
Remarks
Three State Output, DIP-8
Totem Pole Output, DIP-8
Totem Pole Output, DIP-8
Open Collector Output, DIP-8
Totem Pole Output, DIP-8
Totem Pole Output, DIP-8
Three State Output, DIP-8
Three State Output, SMD-8 (option 9)
Totem Pole Output, DIP-8 400 mil (option 6)
Totem Pole Output, SMD-8 (option 7)
Totem Pole Output, SMD-8 (option 9)
Open Collector Output, DIP-8 400 mil (option
6)
Open Collector Output, SMD-8 (option 7)
Totem Pole Output, SMD-8 (option 7)
For additional information on the available options refer to
Option Information.
Document Number 83683
Rev. 1.3, 27-Apr-04
www.vishay.com
1