SFH6700_05 Datasheet, PDF (1/15 Pages) Vishay Siliconix – High Speed Optocoupler 5 MBd, 1 kV/μs dV/dt

SFH6700/01/02/05/11/12/19
Vishay Semiconductors
High Speed Optocoupler,
5 MBd, 1 kV/µs dV/dt
SFH6700/6719
NC ¹
8 V_CC
A2
7 V_O
C3
6 V_E
NC 4
5 GND
SFH6701/6711
NC ¹
8 V_CC
A2
7 V_O
C3
6 NC
NC 4
5 GND
SFH6702/6712
NC ¹
8 V_CC
SFH6705
NC 1
8 V_CC
A2
7 NC
A2
7 NC
C3
6 V_O
C3
6 V_O
NC 4
5 GND
NC 4
i179073
5 GND
DESCRIPTION
The SFH67xx high speed optocoupler series consists of a
GaAlAs infrared emitting diode, optically coupled with an
integrated photo detector. The detector incorporates a
Schmitt-Trigger stage for improved noise immunity. Using
the enable input, the output can switched to the high ohmic
state, which is necessary for data bus applications. A
Faraday shield provides a common mode transient immunity
of 1000 V/µ at V_CM = 50 V for SFH6700/01/02/05 and
2500 V/µ at V_CM = 400 V for SFH6711/12/19.
The SFH67xx uses an industry standard DIP-8 package.
With standard lead bending, creepage distance and
clearance of ≥ 7.0 mm with lead bending options 6, 7, and
9 ≥ 8 mm are achieved.
FEATURES
• Data rate 5.0 MBits/s (2.5 MBit/s over
temperature)
• Buffer
• Isolation test voltage, 5300 V_RMS for 1.0 s
• TTL, LSTTL and CMOS compatible
• Internal shield for very high common mode
transient immunity
• Wide supply voltage range (4.5 to 15 V)
• Low input current (1.6 mA to 5 mA)
• Three state output (SFH6700/19)
• Totem pole output (SFH6701/02/11/12)
• Open collector output (SFH6705)
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and
WEEE 2002/96/EC
APPLICATIONS
• Industrial control
• Replace pulse transformers
• Routine logic interfacing
• Motion/power control
• High speed line receiver
• Microprocessor system interfaces
• Computer peripheral interfaces
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending
available with option 1
ORDER INFORMATION
PART
REMARKS
SFH6700
SFH6701
Three state output, DIP-8
Totem pole output, DIP-8
SFH6702
SFH6705
Totem pole output, DIP-8
Open collector output, DIP-8
SFH6711
SFH6712
Totem pole output, DIP-8
Totem pole output, DIP-8
SFH6719
SFH6700-X009
SFH6701-X006
Three state output, DIP-8
Three state output, SMD-8 (option 9)
Totem pole output, DIP-8 400 mil (option 6)
SFH6701-X007
SFH6701-X009
Totem pole output, SMD-8 (option 7)
Totem pole output, SMD-8 (option 9)
SFH6705-X006
Open collector output, DIP-8 400 mil (option 6)
SFH6705-X007
Open collector output, SMD-8 (option 7)
SFH6711-X007
Totem pole output, SMD-8 (option 7)
Note
For additional information on the available options refer to option information.
Document Number: 83683
Rev. 1.5, 15-Apr-05
For technical questions, contact: [e-mail]
www.vishay.com
1