SFH620A_15 Datasheet, PDF (1/9 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, AC Input

www.vishay.com
SFH620A, SFH6206
Vishay Semiconductors
Optocoupler, Phototransistor Output, AC Input
A/C 1
C/A 2
4C
3E
DESCRIPTION
The SFH620A (DIP) and SFH6206 (SMD) feature a high
current transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infrared
diode emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits. The couplers
are end-stackable with 2.54 mm lead spacing. Creepage
and clearance distances of > 8 mm are achieved with
option 6. This version complies with IEC 60950
(DIN VDE 0805) for reinforced insulation to an operation
voltage of 400 V_RMS or DC.
FEATURES
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 V_RMS
• High collector emitter voltage, V_CEO = 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End-stackable, 0.100" (2.54 mm) spacing
• High common-mode interference immunity
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
The safety application model number covering all products
in this datasheet is SFH620A and SHF6206. This model
number should be used when consulting safety agency
documents.
• UL1577, file no. E52744 system code H, double protection
• CSA 93751
• BSI EN 60950, EN 60065
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• CQC GB8898-2011, GB4943.1-2011
ORDERING INFORMATION
DIP-#
Option 6
S
F
H
6
2
0
x
-
#
X
0
#
#
T
PART NUMBER
CTR
PACKAGE OPTION
TAPE
BIN
AND
REEL
7.62 mm
Option 7
10.16 mm
Option 9
> 0.7 mm
> 0.1 mm
AGENCY
CERTIFIED/PACKAGE
UL, cUL, BSI
40 to 125
SFH620A
63 to 200
CTR (%)
± 10 mA
100 to 320
40 to 125
SFH6206
63 to 200
100 to 320
DIP-4
SFH620A-1
SFH620A-2
SFH620A-3
-
-
-
DIP-4, 400 mil, option 6 SFH620A-1X006 SFH620A-2X006 SFH620A-3X006
-
SMD-4, option 7
-
SFH620A-2X007T ⁽¹⁾
-
-
SMD-4, option 9
-
-
-
SFH6206-1T ⁽¹⁾
-
-
SFH6206-2T ⁽¹⁾
-
-
SFH6206-3T ⁽¹⁾
VDE, UL, CUL, BSI
40 to 125
63 to 200
100 to 320
40 to 125
63 to 200
100 to 320
DIP-4
SFH620A-1X001 SFH620A-2X001 SFH620A-3X001
-
-
-
DIP-4, 400 mil, option 6
-
SFH620A-2X016 SFH620A-3X016
-
-
-
SMD-4, option 7
SMD-4, option 9
-
SFH620A-2X017T
-
-
-
-
-
-
-
-
SFH6206-2X001T ⁽¹⁾ SFH6206-3X001T ⁽¹⁾
Notes
• Additional options may be possible, please contact sales office.
(1) _{Also available in tubes; do not add T to end.}
Rev. 2.3, 31-Aug-15
1
Document Number: 83675
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000