SFH620AA_14 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, AC Input, 5300

www.vishay.com
SFH620AA, SFH620AGB
Vishay Semiconductors
Optocoupler, Phototransistor Output, AC Input, 5300 V_RMS
A/C 1
C/A 2
4C
3E
i179062-1
DESCRIPTION
The SFH620AA, SFH620AGB features a high current
transfer ratio, low coupling capacitance and high isolation
voltage. These couplers have a GaAs infrared emitting diode
emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm lead spacing.
This version complies with IEC 60950 (DIN VDE 0805) for
reinforced insulation up to an operation voltage of 400 V_RMS
or DC.
FEATURES
• High current transfer ratios
- at 5 mA: 50 to 600 %
- at 1.0 mA: 45 % typical (> 13)
• Low CTR degradation
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 V_RMS
• High collector emitter voltage, V_CEO = 70 V
• Low saturation voltage
• Fast switching times
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity (unconnected
base)
• SMD option, see SFH620A, SFH6206 datasheet
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52744 system code H, double protection
• CSA 93751
• BSI IEC 60950; IEC 60065
• VDE 0884-5, DIN EN 60747-5-5, available with option 1
ORDERING INFORMATION
S
F
H
6
2
0
A
x
x
-
X
0
0
1
DIP-4
PART NUMBER
AGENCY CERTIFIED/PACKAGE
UL, CSA, BSI
DIP-4
VDE, UL, CSA, BSI
DIP-4
50 to 600
SFH620AA
50 to 600
-
PACKAGE OPTION
CTR (%)
± 5 mA
7.62 mm
100 to 600
SFH620AGB
100 to 600
SFH620AGB-X001
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
INPUT
DC forward current
Surge forward current
Total power dissipation
OUTPUT
t_p 1.0 μs
I_F
I_FSM
P_diss
Collector emitter voltage
Emitter collector voltage
Collector current
Power dissipation
t_p 1.0 ms
V_CE
V_EC
I_C
I_C
P_diss
VALUE
± 60
± 2.5
100
70
7
50
100
150
UNIT
mA
A
mW
V
V
mA
mA
mW
Rev. 1.8, 19-Nov-14
1
Document Number: 83676
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000