SFH618A_08 Datasheet, PDF (1/9 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, Low Input Current

SFH618A/SFH6186
Vishay Semiconductors
Optocoupler, Phototransistor Output,
Low Input Current
1
i179061
A1
C2
4C
1
3E
DESCRIPTION
The SFH618A (DIP) and SFH6186 (SMD) feature a high
current transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infrared diode
emitter, which is optically coupled to silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.The couplers are
end-stackable with 2.54 mm lead spacing. Creepage and
clearance distances of > 8.0 mm achieved with option 6. This
version complies with IEC 60950 (DIN VDE 0805) for
reinforced insulation to an operation voltage of 400 V_RMS or
DC.
FEATURES
• Good CTR linearity depending on forward
current
• Low CTR degradation
• High collector emitter voltage, V_CEO = 55 V
• Isolation test voltage, 5300 V_RMS
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode transient immunity
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and
WEEE 2002/96/EC
APPLICATIONS
• Telecom
• Industrial controls
• Battery powered equipment
• Office machines
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
• CSA 93751
• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending
available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO
ORDER INFORMATION
PART
SFH618A-2
SFH618A-3
SFH618A-4
SFH618A-5
SFH6186-2
SFH6186-3
SFH6186-4
SFH6186-5
SFH618A-3X006
SFH618A-3X007
SFH618A-4X006
SFH618A-5X006
SFH618A-5X007
Note
For additional information on the available options refer to option information.
REMARKS
CTR 63 to 125 %, DIP-4
CTR 100 to 200 %, DIP-4
CTR 160 to 320 %, DIP-4
CTR 250 to 500 %, DIP-4
CTR 63 to 125 %, SMD-4
CTR 100 to 200 %, SMD-4
CTR 160 to 320 %, SMD-4
CTR 250 to 500 %, SMD-4
CTR 100 to 200 %, DIP-4 400 mil (option 6)
CTR 100 to 200 %, SMD-4 (option 7)
CTR 160 to 320 %, DIP-4 400 mil (option 6)
CTR 250 to 500 %, DIP-4 400 mil (option 6)
CTR 250 to 500 %, SMD-4 (option 7)
Document Number: 83673
Rev. 1.8, 25-Jan-08
For technical questions, contact: [e-mail]
www.vishay.com
1