|
SFH615AY-X019T Datasheet, PDF (1/6 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS | |||
|
Alternative Device Available
SFH615AA, SFH615AGB, SFH615AGR, SFH615ABM, SFH615ABL, SFH615AY, SFH615AB
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
A1
C2
4C
3E
i179060
i179060_1
DESCRIPTION
The SFH615XXX features a large assortment of current
transfer ratio, low coupling capacitance and high isolation
voltage. These couplers have a GaAs infrared emitting diode
emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm lead spacing.
Creepage and clearance distances of > 8 mm are achieved
with option 6. This version complies with 60950
(DIN VDE 0805) for reinforced insulation up to operation
voltage of 400 VRMS or DC.
FEATURES
⢠Low CTR degradation
⢠Good CTR linearity depending on forward
current
⢠Isolation test voltage, 5300 VRMS
⢠High collector emitter voltage, VCEO = 70 V
⢠Low saturation voltage
⢠Fast switching times
⢠Temperature stable
⢠Low coupling capacitance
⢠End stackable, 0.100" (2.54 mm) spacing
⢠High common mode interference immunity (unconnected
base)
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
⢠UL1577, file no. E52744 system code H or J, double
protection
⢠DIN EN 60747-5-5 (VDE 0884) available with option 1
⢠BSI IEC 60950; IEC 60065
ORDERING INFORMATION
PART
SFH615AA
SFH615AB
SFH615ABL
SFH615ABM
SFH615AGB
SFH615AGR
SFH615AY
SFH615AA-X006
SFH615AA-X007
SFH615ABM-X006
SFH615ABM-X007
SFH615AGB-X006
SFH615AGB-X009
SFH615AGR-X006
SFH615AGR-X007
SFH615AY-X006
SFH615AY-X008
SFH615AY-X009
REMARKS
CTR 50 % to 600 %, DIP-4
CTR 80 % to 260 %, DIP-4
CTR 200 % to 600 %, DIP-4
CTR 200 % to 400 %, DIP-4
CTR 100 % to 600 %, DIP-4
CTR 100 % to 300 %, DIP-4
CTR 50 % to 150 %, DIP-4
CTR 50 % to 600 %, DIP-4 400 mil (option 6)
CTR 50 % to 600 %, SMD-4 (option 7)
CTR 200 % to 400 %, DIP-4 400 mil (option 6)
CTR 200 % to 400 %, SMD-4 (option 7)
CTR 100 % to 600 %, DIP-4 400 mil (option 6)
CTR 100 % to 600 %, SMD-4 (option 9)
CTR 100 % to 300 %, DIP-4 400 mil (option 6)
CTR 100 % to 300 %, SMD-4 (option 7)
CTR 50 % to 150 %, DIP-4 400 mil (option 6)
CTR 50 % to 150 %,SMD-4 (option 8)
CTR 50 % to 150 %,SMD-4 (option 9)
Note
⢠For additional information on the available options refer to option information.
Rev. 1.9, 23-May-13
1
Document Number: 83672
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |