SFH615AA Datasheet, PDF (1/7 Pages) Vishay Siliconix – Optocoupler, High Reliability, 5300 VRMS

VISHAY
SFH615AA/AGB/AGR/ABM/ABL/AY/AB
Vishay Semiconductors
Optocoupler, High Reliability, 5300 V_RMS
Features
• Low CTR Degradation
• Good CTR Linearity Depending on Forward Cur-
rent
• Isolation Test Voltage, 5300 V_RMS
• High Collector-emitter Voltage, V_CEO = 70 V
• Low Saturation Voltage
• Fast Switching Times
• Temperature Stable
• Low Coupling Capacitance
• End-Stackable, .100 " (2.54 mm) Spacing
• High Common-mode Interference Immunity
(Unconnected Base)
Agency Approvals
• UL - File No. E52744 System Code H or J
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Description
The SFH615XXX features a large assortment of cur-
rent transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infra-
red emitting diode emitter, which is optically coupled
to a silicon planar phototransistor detector, and is
incorporated in a plastic DIP-4 package.
The coupling devices are designed for signal trans-
mission between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm lead
spacing.
Creepage and clearance distances of > 8 mm are
achieved with option 6. This version complies with
60950 (DIN VDE 0805) for reinforced insulation up to
operation voltage of 400 V_RMS or DC.
i179060
A1
C2
4C
3E
Order Information
Part
Remarks
SFH615AA
SFH615AB
CTR 50 - 600 %, DIP-4
CTR 80 - 260 %, DIP-4
SFH615ABL
SFH615ABM
SFH615AGB
CTR 200 - 600 %, DIP-4
CTR 200 - 400 %, DIP-4
CTR 100 - 600 %, DIP-4
SFH615AGR
SFH615AY
SFH615AA-X006
CTR 100 - 300 %, DIP-4
CTR 50 - 150 %, DIP-4
CTR 50 - 600 %, DIP-4 400 mil (option 6)
SFH615AA-X007
SFH615ABM-X006
SFH615ABM-X007
CTR 50 - 600 %, SMD-4 (option 7)
CTR 200 - 400 %, DIP-4 400 mil (option 6)
CTR 200 - 400 %, SMD-4 (option 7)
SFH615AGB-X006
SFH615AGB-X009
SFH615AGR-X006
CTR 100 - 600 %, DIP-4 400 mil (option 6)
CTR 100 - 600 %, SMD-4 (option 9)
CTR 100 - 300 %, DIP-4 400 mil (option 6)
SFH615AGR-X007
SFH615AY-X006
SFH615AY-X008
CTR 100 - 300 %, SMD-4 (option 7)
CTR 50 - 150 %, DIP-4 400 mil (option 6)
CTR 50 - 150 %, SMD-4 (option 8)
SFH615AY-X009 CTR 50 - 150 %, SMD-4 (option 9)
For additional information on the available options refer to
Option Information.
Document Number 83672
Rev. 1.4, 19-Apr-04
www.vishay.com
1