SFH610A Datasheet, PDF (1/10 Pages) Infineon Technologies AG – 5.3 kV TRIOS Optocoupler High Reliability

SFH610A / SFH6106
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 V_RMS
Features
• Good CTR Linearity Depending on
Forward Current
• Isolation Test Voltage, 5300 V_RMS
• High Collector-Emitter Voltage,
e3
V_CEO = 70 V
• Low Saturation Voltage
• Fast Switching Times
• Low CTR Degradation
• Temperature Stable
• Low Coupling Capacitance
• End-Stackable, 0.100" (2.54 mm) Spacing
• High Common-Mode Interference Immunity
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC
i179056
and WEEE 2002/96/EC
SFH610A
A1
C2
4E
3C
SFH6106
A1
4E
C2
3C
Agency Approvals
• UL1577, File No. E52744 System Code H or J,
Double Protection
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
• CSA 93751
• BSI IEC60950 IEC60065
Description
The SFH610A (DIP) and SFH6106 (SMD) feature a
high current transfer ratio, low coupling capacitance
and high isolation voltage. These couplers have a
GaAs infrared diode emitter, which is optically cou-
pled to a silicon planar phototransistor detector, and
is incorporated in a plastic DIP-4 or SMD package.
The coupling devices are designed for signal trans-
mission between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spac-
ing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6. This version complies with
IEC 60950 (DIN VDE 0805) for reinforced insulation
up to an operation voltage of 400 V_RMS or DC. Spec-
ifications subject to change.
Order Information
Part
SFH610A-1
SFH610A-2
SFH610A-3
SFH610A-4
SFH610A-5
SFH6106-1
SFH6106-2
SFH6106-3
SFH6106-4
SFH6106-5T
SFH610A-1X006
SFH610A-1X018T
SFH610A-2X006
SFH610A-3X006
SFH610A-3X007
SFH610A-4X006
Remarks
CTR 40 - 80 %, DIP-4
CTR 63 - 125 %, DIP-4
CTR 100 - 200 %, DIP-4
CTR 160 - 320 %, DIP-4
CTR 250 - 500 %, DIP-4
CTR 40 - 80 %, SMD-4
CTR 63 - 125 %, SMD-4
CTR 100 - 200 %, SMD-4
CTR 160 - 320 %, SMD-4
CTR 250 - 500 %, SMD-4, tape and reel
CTR 40 - 80 %, DIP-4 400 mil
CTR 40 - 80 %, SMD-4, wide leadspread
CTR 63 - 125 %, DIP-4 400 mil
CTR 100 - 200 %, DIP-4 400 mil
CTR 100 - 200 %, SMD-4
CTR 160 - 320 %, DIP-4 400 mil
For additional information on the available options refer to
Option Information.
Document Number 83666
Rev. 1.9, 23-Mar-06
www.vishay.com
1