SFH6106-4T Datasheet, PDF (1/10 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS

SFH610A, SFH6106
Vishay Semiconductors
Optocoupler, Phototransistor Output,
High Reliability, 5300 V_RMS
SFH610A
A1
C2
4E
3C
SFH6106
A1
4E
C2
3C
i179056
DESCRIPTION
The SFH610A (DIP) and SFH6106 (SMD) feature a high
current transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infrared diode
emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are achieved
with option 6. This version complies with IEC 60950
(DIN VDE 0805) for reinforced insulation up to an operation
voltage of 400 V_RMS or DC. Specifications subject to change.
FEATURES
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 V_RMS
• High collector emitter voltage, V_CEO = 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and
WEEE 2002/96/EC
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
• DIN EN 60747-5-5 (VDE 0884) available with option 1
• CSA 93751
• BSI IEC 60950; IEC 60065
ORDER INFORMATION
PART
SFH610A-1
SFH610A-2
SFH610A-3
SFH610A-4
SFH610A-5
SFH6106-1
SFH6106-2
SFH6106-3
SFH6106-4
SFH6106-5T
SFH610A-1X006
SFH610A-1X018T
SFH610A-2X006
SFH610A-3X006
SFH610A-3X007
SFH610A-4X006
Note
For additional information on the available options refer to option information.
REMARKS
CTR 40 % to 80 %, DIP-4
CTR 63 % to 125 %, DIP-4
CTR 100 % to 200 %, DIP-4
CTR 160 % to 320 %, DIP-4
CTR 250 % to 500 %, DIP-4
CTR 40 % to 80 %, SMD-4
CTR 63 % to 125 %, SMD-4
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, SMD-4
CTR 250 % to 500 %, SMD-4, tape and reel
CTR 40 % to 80 %, DIP-4 400 mil
CTR 40 % to 80 %, SMD-4 400 mil, wide leadspread
CTR 63 % to 125 %, DIP-4 400 mil
CTR 100 % to 200 %, DIP-4 400 mil
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, DIP-4 400 mil
Document Number: 83666
Rev. 2.0, 10-Dec-08
For technical questions, contact: [e-mail]
www.vishay.com
607